Buttweld End Caps: Dimensions, Sizes, and Prices
Fortune Fittings Pvt. Ltd. proudly presents its range of Buttweld End Caps, meticulously crafted to cap off the ends of pipes or tubes with precision and reliability. As a leading manufacturer and supplier, we offer a diverse selection of end caps suitable for various applications, ensuring optimal performance and durability.
Our Buttweld End Caps are crafted from high-quality materials, including stainless steel, copper, and ductile iron, each chosen for its specific properties and suitability for different environments. Whether you require corrosion resistance, temperature resistance, or durability, our end caps are engineered to meet your needs.
Available in a wide range of dimensions, our end caps cater to different pipe sizes, ranging from ½ inch to 48 inches in diameter. The thickness of the end caps varies according to the pipe diameter, ensuring a snug fit and reliable performance.
We understand the importance of protection, containment, aesthetics, and safety in piping systems, and our end caps serve these purposes effectively. By capping off the end of a pipe or tube, our end caps protect against external factors such as dirt, debris, and moisture, ensuring the integrity of your piping system.
Moreover, our end caps provide containment, keeping the contents of the pipe or tube secure and separate from the surrounding environment. Whether you’re in the chemical industry, food processing, or plumbing, our end caps offer peace of mind and reliability.
With Fortune Fittings Pvt. Ltd., you can expect superior quality, precision engineering, and exceptional customer service. Our ready inventory of Buttweld End Caps includes various sizes, from 4 Emt to 160mm Drainage Pipe End Cap, ensuring we have the right solution for your needs.
Experience the difference with Fortune Fittings Pvt. Ltd. and explore our range of Buttweld End Caps today. Get in touch to learn more about our sizes, prices, and dimensions, and let us provide the perfect solution for your piping system requirements.
What is a Buttweld End Caps?
A Buttweld End Cap is a type of pipe fitting designed to cap off the end of a pipe or tube. It is used to seal the end of the pipe, preventing the ingress of foreign particles, contaminants, or fluids into the piping system. End caps are commonly used in various industries and applications where the termination of a pipe is required for safety, containment, or aesthetic purposes. These fittings are welded directly onto the end of the pipe, providing a secure and permanent closure. They are available in different materials, sizes, and dimensions to accommodate various pipe sizes and specifications.
Buttweld End Caps dimensions
The dimensions of a Buttweld End Caps play a crucial role in ensuring proper fit and functionality within a piping system.
For More Details CLICK HERE!
Materials Used in Buttweld End Caps
Buttweld End Caps are manufactured using a variety of materials, each chosen based on its specific properties and suitability for various applications. Some common materials used in the construction of Buttweld End Caps include:
1. Stainless Steel: Stainless steel is widely preferred for its excellent corrosion resistance, durability, and strength. It is suitable for applications where hygiene, sanitation, and resistance to chemical corrosion are crucial, such as in food processing, pharmaceutical, and chemical industries.
2. Carbon Steel: Carbon steel is valued for its high tensile strength, affordability, and suitability for high-pressure applications. It is commonly used in industrial settings, including oil and gas pipelines, construction, and infrastructure projects.
3. Copper: Copper is known for its excellent thermal conductivity, corrosion resistance, and malleability. It is often used in plumbing and HVAC systems where heat transfer efficiency and resistance to microbial growth are important.
4. Ductile Iron: Ductile iron offers high tensile strength, impact resistance, and durability. It is commonly used in applications where strength and toughness are essential, such as in water and wastewater systems, mining, and agricultural equipment.
5. Alloy Steel: Alloy steel contains additional alloying elements such as chromium, molybdenum, or nickel, which enhance its mechanical properties and resistance to corrosion and high temperatures. Alloy steel end caps are suitable for demanding applications in aerospace, automotive, and petrochemical industries.
The choice of material depends on factors such as the operating environment, temperature, pressure, and fluid characteristics. Manufacturers select materials based on these considerations to ensure optimal performance, longevity, and compatibility with specific applications.
Applications of Buttweld End Caps
Buttweld End Caps find versatile applications across various industries due to their ability to cap off the end of pipes or tubes securely. Some common applications include:
1. Pipeline Systems: End caps are essential components in pipeline systems to seal the ends of pipes, preventing the ingress of contaminants, moisture, and debris. They help maintain the integrity of the pipeline and protect against corrosion and damage.
2. Plumbing Systems: In plumbing installations, end caps are used to seal the ends of pipes in residential, commercial, and industrial buildings. They ensure leak-proof connections and prevent the entry of foreign particles, ensuring the smooth flow of water or other fluids.
3. Process Industries: End caps play a crucial role in various process industries such as chemical processing, oil and gas refining, and petrochemical plants. They are used to seal openings in vessels, tanks, and equipment, maintaining process integrity and preventing product contamination.
4. HVAC (Heating, Ventilation, and Air Conditioning): HVAC systems utilize end caps to seal the ends of ductwork, air handling units, and ventilation systems. By sealing off ducts and channels, end caps help optimize airflow, improve energy efficiency, and maintain indoor air quality.
5. Structural Fabrication: In structural fabrication and construction projects, end caps are used to close off the ends of structural members such as beams, columns, and tubes. They provide a finished appearance, protect against corrosion, and enhance structural stability.
6. Water Treatment and Distribution: End caps are employed in water treatment plants and distribution networks to seal the ends of pipes, valves, and fittings. They help prevent contamination of potable water supplies and maintain system hygiene and safety.
7. Automotive and Aerospace: In automotive and aerospace applications, end caps are used to seal fluid reservoirs, fuel tanks, and hydraulic systems. They ensure leak-proof connections, protect against environmental factors, and maintain system performance and reliability.
8. Industrial Machinery: End caps are utilized in various industrial machinery and equipment to seal bearing housings, gearboxes, and hydraulic cylinders. They help prevent the entry of contaminants, extend component life, and ensure smooth operation.
The versatility, reliability, and durability of Buttweld End Caps make them indispensable components in a wide range of applications, ensuring efficient fluid containment, structural integrity, and system performance.
Purchase Buttweld End Caps
For detailed information on ASME B16.9 Buttweld End Caps, including types, weight chart, size chart, tolerance, and dimensions with drawings, click on your desired fittings. Need a quick quote or price list? CLICK HERE!
ASME B16.9 Buttweld Fittings Types and Applications
ASME B16.9 standards cover a wide range of buttweld fittings, including:
These fittings find applications across various industries, offering reliable performance and leak-free connections in critical piping systems.
Optimizing Your Piping System with Buttweld Fittings
Whether you’re in the chemical, fabrication, food processing, or power generation industry, choosing the right buttweld fittings is essential for optimizing your piping system’s performance. From stainless steel pipe fittings to butt weld pipe fittings, Fortune Fittings Pvt. Ltd. offers a comprehensive range of high-quality fittings to meet your specific requirements.
In conclusion, buttweld fittings play a crucial role in ensuring the efficiency and reliability of piping systems across industries. By understanding the types, materials, and applications of buttweld fittings, you can make informed decisions to optimize your piping infrastructure for long-term success.
For more information on buttweld fittings and other piping components, visit [Fortune Fittings Pvt. Ltd.] today!
Buttweld Dimensions
45°-90° LR and 3D ASME B16.9
| NPS | O.D.D | 90° LRA | 45° LRB | 90° 3DA | 45° 3DB |
| 1/2 | 21.3 | 38 | 16 | ||
| 3/4 | 26.7 | 38 | 19 | 57 | 24 |
| 1 | 33.4 | 38 | 22 | 76 | 31 |
| 1.1/4 | 42.2 | 48 | 25 | 95 | 39 |
| 1.1/2 | 48.3 | 57 | 29 | 114 | 47 |
| 2 | 60.3 | 76 | 35 | 152 | 63 |
| 2.1/2 | 73 | 95 | 44 | 190 | 79 |
| 3 | 88.9 | 114 | 51 | 229 | 95 |
| 3.1/2 | 101.6 | 133 | 57 | 267 | 111 |
| 4 | 114.3 | 152 | 64 | 305 | 127 |
| 5 | 141.3 | 190 | 79 | 381 | 157 |
| 6 | 168.3 | 229 | 95 | 457 | 189 |
| 8 | 219.1 | 305 | 127 | 610 | 252 |
| 10 | 273 | 381 | 159 | 762 | 316 |
| 12 | 323.8 | 457 | 190 | 914 | 378 |
| 14 | 355.6 | 533 | 222 | 1067 | 441 |
| 16 | 406.4 | 610 | 254 | 1219 | 505 |
| 18 | 457 | 686 | 286 | 1372 | 568 |
| 20 | 508 | 762 | 318 | 1524 | 632 |
| 22 | 559 | 838 | 343 | 1676 | 694 |
| 24 | 610 | 914 | 381 | 1829 | 757 |
| 26 | 660 | 991 | 406 | 1981 | 821 |
| 28 | 711 | 1067 | 438 | 2134 | 883 |
| 30 | 762 | 1143 | 470 | 2286 | 946 |
| 32 | 813 | 1219 | 502 | 2438 | 1010 |
| 34 | 864 | 1295 | 533 | 2591 | 1073 |
| 36 | 914 | 1372 | 565 | 2743 | 1135 |
| 38 | 965 | 1448 | 600 | 2896 | 1200 |
| 40 | 1016 | 1524 | 632 | 3048 | 1264 |
| 42 | 1067 | 1600 | 660 | 3200 | 1326 |
| 44 | 1118 | 1676 | 695 | 3353 | 1389 |
| 46 | 1168 | 1753 | 727 | 3505 | 1453 |
| 48 | 1219 | 1829 | 759 | 3658 | 1516 |
Dimensional Tolerances of Butt Weld Elbows 45° & 90° LR & 3D ASME B16.9
| Nominal Pipe Size | 1/2 to 2.1/2 | 3 to 3.1/2 | 4 | 5 to 8 |
| Outside Diameterat Bevel (D) | + 1.6– 0.8 | 1.6 | 1.6 | + 2.4– 1.6 |
| Inside Diameter at End | 0.8 | 1.6 | 1.6 | 1.6 |
| Center to End LR (A/B) | 2 | 2 | 2 | 2 |
| Center to End 3D (A/B) | 3 | 3 | 3 | 3 |
| Nominal Pipe Size | 10 to 18 | 20 to 24 | 26 to 30 | 32 to 48 |
| Outside Diameterat Bevel (D) | + 4– 3.2 | + 6.4– 4.8 | + 6.4– 4.8 | + 6.4– 4.8 |
| Inside Diameter at End | 3.2 | 4.8 | + 6.4– 4.8 | + 6.4– 4.8 |
| Center to End LR (A/B) | 2 | 2 | 3 | 5 |
| Center to End 3D (A/B) | 3 | 3 | 6 | 6 |
| Wall Thickness (t) | Not less than 87.5% of Nominal Wall Thickness | |||
Dimensions Butt Weld Elbows
45°-90° LR and 3D ASME B16.9
| NPS | O.D.D | 90° LRA | 45° LRB | 90° 3DA | 45° 3DB |
| 1/2 | 21.3 | 38 | 16 | ||
| 3/4 | 26.7 | 38 | 19 | 57 | 24 |
| 1 | 33.4 | 38 | 22 | 76 | 31 |
| 1.1/4 | 42.2 | 48 | 25 | 95 | 39 |
| 1.1/2 | 48.3 | 57 | 29 | 114 | 47 |
| 2 | 60.3 | 76 | 35 | 152 | 63 |
| 2.1/2 | 73 | 95 | 44 | 190 | 79 |
| 3 | 88.9 | 114 | 51 | 229 | 95 |
| 3.1/2 | 101.6 | 133 | 57 | 267 | 111 |
| 4 | 114.3 | 152 | 64 | 305 | 127 |
| 5 | 141.3 | 190 | 79 | 381 | 157 |
| 6 | 168.3 | 229 | 95 | 457 | 189 |
| 8 | 219.1 | 305 | 127 | 610 | 252 |
| 10 | 273 | 381 | 159 | 762 | 316 |
| 12 | 323.8 | 457 | 190 | 914 | 378 |
| 14 | 355.6 | 533 | 222 | 1067 | 441 |
| 16 | 406.4 | 610 | 254 | 1219 | 505 |
| 18 | 457 | 686 | 286 | 1372 | 568 |
| 20 | 508 | 762 | 318 | 1524 | 632 |
| 22 | 559 | 838 | 343 | 1676 | 694 |
| 24 | 610 | 914 | 381 | 1829 | 757 |
| 26 | 660 | 991 | 406 | 1981 | 821 |
| 28 | 711 | 1067 | 438 | 2134 | 883 |
| 30 | 762 | 1143 | 470 | 2286 | 946 |
| 32 | 813 | 1219 | 502 | 2438 | 1010 |
| 34 | 864 | 1295 | 533 | 2591 | 1073 |
| 36 | 914 | 1372 | 565 | 2743 | 1135 |
| 38 | 965 | 1448 | 600 | 2896 | 1200 |
| 40 | 1016 | 1524 | 632 | 3048 | 1264 |
| 42 | 1067 | 1600 | 660 | 3200 | 1326 |
| 44 | 1118 | 1676 | 695 | 3353 | 1389 |
| 46 | 1168 | 1753 | 727 | 3505 | 1453 |
| 48 | 1219 | 1829 | 759 | 3658 | 1516 |
| Nominal Pipe Size | 1/2 to 2.1/2 | 3 to 3.1/2 | 4 | 5 to 8 |
| Outside Diameterat Bevel (D) | + 1.6– 0.8 | 1.6 | 1.6 | + 2.4– 1.6 |
| Inside Diameter at End | 0.8 | 1.6 | 1.6 | 1.6 |
| Center to End LR (A/B) | 2 | 2 | 2 | 2 |
| Center to End 3D (A/B) | 3 | 3 | 3 | 3 |
| Nominal Pipe Size | 10 to 18 | 20 to 24 | 26 to 30 | 32 to 48 |
| Outside Diameterat Bevel (D) | + 4– 3.2 | + 6.4– 4.8 | + 6.4– 4.8 | + 6.4– 4.8 |
| Inside Diameter at End | 3.2 | 4.8 | + 6.4– 4.8 | + 6.4– 4.8 |
| Center to End LR (A/B) | 2 | 2 | 3 | 5 |
| Center to End 3D (A/B) | 3 | 3 | 6 | 6 |
| Wall Thickness (t) | Not less than 87.5% of Nominal Wall Thickness | |||
Butt Weld Elbows 90°-SR- ASME B16.9 
| NPS | O.D.D | cteA | NPS | O.D.D | cteA |
| 1 | 33.4 | 25 | 8 | 219.1 | 203 |
| 1.1/4 | 42.2 | 32 | 10 | 273 | 254 |
| 1.1/2 | 48.3 | 38 | 12 | 323.8 | 305 |
| 2 | 60.3 | 51 | 14 | 355.6 | 356 |
| 2.1/2 | 73 | 64 | 16 | 406.4 | 406 |
| 3 | 88.9 | 76 | 18 | 457 | 457 |
| 3.1/2 | 101.6 | 89 | 20 | 508 | 508 |
| 4 | 114.3 | 102 | 22 | 559 | 559 |
| 5 | 141.3 | 127 | 24 | 610 | 610 |
| 6 | 168.3 | 152 | – | – | – |
| Nominal Pipe Size | 1/2 to 2.1/2 | 3 to 3.1/2 | 4 | 5 to 8 |
| Outside Diameterat Bevel (D) | + 1.6– 0.8 | 1.6 | 1.6 | + 2.4– 1.6 |
| Inside Diameter at End | 0.8 | 1.6 | 1.6 | 1.6 |
| cte (A) | 2 | 2 | 2 | 2 |
| Nominal Pipe Size | 10 to 18 | 20 to 24 | 26 to 30 | 32 to 48 |
| Outside Diameterat Bevel (D) | + 4– 3.2 | + 6.4– 4.8 | + 6.4– 4.8 | + 6.4– 4.8 |
| Inside Diameter at End | 3.2 | 4.8 | + 6.4– 4.8 | + 6.4– 4.8 |
| cte (A) | 2 | 2 | 3 | 5 |
| Wall Thickness (t) | Not less than 87.5% of Nominal Wall Thickness | |||
Butt Weld Elbows 180° LR & SR ASME B16.9
| NPS | O.D. D | 180° LR | 180° SR | ||
| Center to Center O | Back toFace K | Center to Center O | Back toFace K | ||
| 1/2 | 21.3 | 76 | 48 | ||
| 3/4 | 26.7 | 76 | 51 | ||
| 1 | 33.4 | 76 | 56 | 51 | 41 |
| 1.1/4 | 42.2 | 95 | 70 | 64 | 52 |
| 1.1/2 | 48.3 | 114 | 83 | 76 | 62 |
| 2 | 60.3 | 152 | 106 | 102 | 81 |
| 2.1/2 | 73 | 190 | 132 | 127 | 100 |
| 3 | 88.9 | 229 | 159 | 152 | 121 |
| 3.1/2 | 101.6 | 267 | 184 | 178 | 140 |
| 4 | 114.3 | 305 | 210 | 203 | 159 |
| 5 | 141.3 | 381 | 262 | 254 | 197 |
| 6 | 168.3 | 457 | 313 | 305 | 237 |
| 8 | 219.1 | 610 | 414 | 406 | 313 |
| 10 | 273 | 762 | 518 | 508 | 391 |
| 12 | 323.8 | 914 | 619 | 610 | 467 |
| 14 | 355.6 | 1067 | 711 | 711 | 533 |
| 16 | 406.4 | 1219 | 813 | 813 | 610 |
| 18 | 457 | 1372 | 914 | 914 | 686 |
| 20 | 508 | 1524 | 1016 | 1016 | 762 |
| 22 | 559 | 1676 | 1118 | 1118 | 838 |
| 24 | 610 | 1829 | 1219 | 1219 | 914 |
| Nominal Pipe Size | 1/2 to 2.1/2 | 3 to 3.1/2 | 4 |
| Outside Diameterat Bevel (D) | + 1.6– 0.8 | 1.6 | 1.6 |
| Inside Diameter at End | 0.8 | 1.6 | 1.6 |
| Center to Center (O) | 6 | 6 | 6 |
| Back to Face (K) | 6 | 6 | 6 |
| Nominal Pipe Size | 5 to 8 | 10 to 18 | 20 to 24 |
| Outside Diameterat Bevel (D) | + 2.4– 1.6 | + 4– 3.2 | + 6.4– 4.8 |
| Inside Diameter at End | 1.6 | 3.2 | 4.8 |
| Center to Center (O) | 6 | 10 | 10 |
| Back to Face (K) | 6 | 6 | 6 |
| Wall Thickness (t) | Not less than 87.5% of Nominal Wall Thickness | ||
Butt Weld Elbows 180° LR & SR ASME B16.9
| NPS | O.D. D | 180° LR | 180° SR | ||
| Center to Center O | Back toFace K | Center to Center O | Back toFace K | ||
| 1/2 | 21.3 | 76 | 48 | ||
| 3/4 | 26.7 | 76 | 51 | ||
| 1 | 33.4 | 76 | 56 | 51 | 41 |
| 1.1/4 | 42.2 | 95 | 70 | 64 | 52 |
| 1.1/2 | 48.3 | 114 | 83 | 76 | 62 |
| 2 | 60.3 | 152 | 106 | 102 | 81 |
| 2.1/2 | 73 | 190 | 132 | 127 | 100 |
| 3 | 88.9 | 229 | 159 | 152 | 121 |
| 3.1/2 | 101.6 | 267 | 184 | 178 | 140 |
| 4 | 114.3 | 305 | 210 | 203 | 159 |
| 5 | 141.3 | 381 | 262 | 254 | 197 |
| 6 | 168.3 | 457 | 313 | 305 | 237 |
| 8 | 219.1 | 610 | 414 | 406 | 313 |
| 10 | 273 | 762 | 518 | 508 | 391 |
| 12 | 323.8 | 914 | 619 | 610 | 467 |
| 14 | 355.6 | 1067 | 711 | 711 | 533 |
| 16 | 406.4 | 1219 | 813 | 813 | 610 |
| 18 | 457 | 1372 | 914 | 914 | 686 |
| 20 | 508 | 1524 | 1016 | 1016 | 762 |
| 22 | 559 | 1676 | 1118 | 1118 | 838 |
| 24 | 610 | 1829 | 1219 | 1219 | 914 |
| Nominal Pipe Size | 1/2 to 2.1/2 | 3 to 3.1/2 | 4 |
| Outside Diameterat Bevel (D) | + 1.6– 0.8 | 1.6 | 1.6 |
| Inside Diameter at End | 0.8 | 1.6 | 1.6 |
| Center to Center (O) | 6 | 6 | 6 |
| Back to Face (K) | 6 | 6 | 6 |
| Nominal Pipe Size | 5 to 8 | 10 to 18 | 20 to 24 |
| Outside Diameterat Bevel (D) | + 2.4– 1.6 | + 4– 3.2 | + 6.4– 4.8 |
| Inside Diameter at End | 1.6 | 3.2 | 4.8 |
| Center to Center (O) | 6 | 10 | 10 |
| Back to Face (K) | 6 | 6 | 6 |
| Wall Thickness (t) | Not less than 87.5% of Nominal Wall Thickness | ||
Dimensions Butt Weld Straight Tees ASME B16.9
| NPS | O.D.D | Center to EndC | Center to EndM |
| 1/2 | 21.3 | 25 | 25 |
| 3/4 | 26.7 | 29 | 29 |
| 1 | 33.4 | 38 | 38 |
| 1.1/4 | 42.2 | 48 | 48 |
| 1.1/2 | 48.3 | 57 | 57 |
| 2 | 60.3 | 64 | 64 |
| 2.1/2 | 73 | 76 | 76 |
| 3 | 88.9 | 86 | 86 |
| 3.1/2 | 101.6 | 95 | 95 |
| 4 | 114.3 | 105 | 105 |
| 5 | 141.3 | 124 | 124 |
| 6 | 168.3 | 143 | 143 |
| 8 | 219.1 | 178 | 178 |
| 10 | 273 | 216 | 216 |
| 12 | 323.8 | 254 | 254 |
| 14 | 355.6 | 279 | 279 |
| 16 | 406.4 | 305 | 305 |
| 18 | 457 | 343 | 343 |
| 20 | 508 | 381 | 381 |
| 22 | 559 | 419 | 419 |
| 24 | 610 | 432 | 432 |
| 26 | 660 | 495 | 495 |
| 28 | 711 | 521 | 521 |
| 30 | 762 | 559 | 559 |
| 32 | 813 | 597 | 597 |
| 34 | 864 | 635 | 635 |
| 36 | 914 | 673 | 673 |
| 38 | 965 | 711 | 711 |
| 40 | 1016 | 749 | 749 |
| 42 | 1067 | 762 | 711 |
| 44 | 1118 | 813 | 762 |
| 46 | 1168 | 851 | 800 |
| 48 | 1219 | 889 | 838 |
| Nominal Pipe Size | 1/2to2.1/2 | 3to3.1/2 | 4 | 5to8 | 10to18 | 20to24 | 26to30 | 32to48 |
| Outside Diaat Bevel (D) | +1.6-0.8 | 1.6 | 1.6 | +2.4-1.6 | +4-3.2 | +6.4-4.8 | +6.4-4.8 | +6.4-4.8 |
| Inside Dia at End | 0.8 | 1.6 | 1.6 | 1.6 | 3.2 | 4.8 | +6.4-4.8 | +6.4-4.8 |
| Center to End (C / M) | 2 | 2 | 2 | 2 | 2 | 2 | 3 | 5 |
| Wall Thk (t) | Not less than 87.5% of Nominal Wall Thickness | |||||||
Dimensions Butt Weld
Straight Tees ASME B16.9
| NPS | O.D.D | Center to EndC | Center to EndM |
| 1/2 | 21.3 | 25 | 25 |
| 3/4 | 26.7 | 29 | 29 |
| 1 | 33.4 | 38 | 38 |
| 1.1/4 | 42.2 | 48 | 48 |
| 1.1/2 | 48.3 | 57 | 57 |
| 2 | 60.3 | 64 | 64 |
| 2.1/2 | 73 | 76 | 76 |
| 3 | 88.9 | 86 | 86 |
| 3.1/2 | 101.6 | 95 | 95 |
| 4 | 114.3 | 105 | 105 |
| 5 | 141.3 | 124 | 124 |
| 6 | 168.3 | 143 | 143 |
| 8 | 219.1 | 178 | 178 |
| 10 | 273 | 216 | 216 |
| 12 | 323.8 | 254 | 254 |
| 14 | 355.6 | 279 | 279 |
| 16 | 406.4 | 305 | 305 |
| 18 | 457 | 343 | 343 |
| 20 | 508 | 381 | 381 |
| 22 | 559 | 419 | 419 |
| 24 | 610 | 432 | 432 |
| 26 | 660 | 495 | 495 |
| 28 | 711 | 521 | 521 |
| 30 | 762 | 559 | 559 |
| 32 | 813 | 597 | 597 |
| 34 | 864 | 635 | 635 |
| 36 | 914 | 673 | 673 |
| 38 | 965 | 711 | 711 |
| 40 | 1016 | 749 | 749 |
| 42 | 1067 | 762 | 711 |
| 44 | 1118 | 813 | 762 |
| 46 | 1168 | 851 | 800 |
| 48 | 1219 | 889 | 838 |
| Nominal Pipe Size | 1/2to2.1/2 | 3to3.1/2 | 4 | 5to8 | 10to18 | 20to24 | 26to30 | 32to48 |
| Outside Diaat Bevel (D) | +1.6-0.8 | 1.6 | 1.6 | +2.4-1.6 | +4-3.2 | +6.4-4.8 | +6.4-4.8 | +6.4-4.8 |
| Inside Dia at End | 0.8 | 1.6 | 1.6 | 1.6 | 3.2 | 4.8 | +6.4-4.8 | +6.4-4.8 |
| Center to End (C / M) | 2 | 2 | 2 | 2 | 2 | 2 | 3 | 5 |
| Wall Thk (t) | Not less than 87.5% of Nominal Wall Thickness | |||||||
Butt Weld Reducers
Concentric and Eccentric ASME B16.9
| NPS | O.D.D | O.D.D1 | LengthH |
| 3/4 – 1/2 | 26.7 | 21.3 | 38 |
| 1 – 1/2 | 33.4 | 21.3 | 51 |
| 1 – 3/4 | 33.4 | 26.7 | 51 |
| 1.1/4 – 1/2 | 42.2 | 21.3 | 51 |
| 1.1/4 – 3/4 | 42.2 | 26.7 | 51 |
| 1.1/4 – 1 | 42.2 | 33.4 | 51 |
| 1.1/2 – 1/2 | 48.3 | 21.3 | 64 |
| 1.1/2 – 3/4 | 48.3 | 26.7 | 64 |
| 1.1/2 – 1 | 48.3 | 33.4 | 64 |
| 1.1/2 – 1.1/4 | 48.3 | 42.2 | 64 |
| 2 – 3/4 | 60.3 | 26.7 | 76 |
| 2 – 1 | 60.3 | 33.4 | 76 |
| 2 – 1.1/4 | 60.3 | 42.2 | 76 |
| 2 – 1.1/2 | 60.3 | 48.3 | 76 |
| 2.1/2 – 1 | 73 | 33.4 | 89 |
| 2.1/2 – 1.1/4 | 73 | 42.2 | 89 |
| 2.1/2 – 1.1/2 | 73 | 48.3 | 89 |
| 2.1/2 – 2 | 73 | 60.3 | 89 |
| 3 – 1.1/4 | 88.9 | 42.2 | 89 |
| 3 – 1.1/2 | 88.9 | 48.3 | 89 |
| 3 – 2 | 88.9 | 60.3 | 89 |
| 3 – 2.1/2 | 88.9 | 73 | 89 |
| 3.1/2 – 1.1/4 | 101.6 | 42.2 | 102 |
| 3.1/2 – 1.1/2 | 101.6 | 48.3 | 102 |
| 3.1/2 – 2 | 101.6 | 60.3 | 102 |
| 3.1/2 – 2.1/2 | 101.6 | 73 | 102 |
| 3.1/2 – 3 | 101.6 | 88.9 | 102 |
| 4 – 1.1/2 | 114.3 | 48.3 | 102 |
| 4 – 2 | 114.3 | 60.3 | 102 |
| 4 – 2.1/2 | 114.3 | 73 | 102 |
| 4 – 3 | 114.3 | 88.9 | 102 |
| 4 – 3.1/2 | 114.3 | 101.6 | 102 |
| 5 – 2 | 141.3 | 60.3 | 127 |
| 5 – 2.1/2 | 141.3 | 73 | 127 |
| 5 – 3 | 141.3 | 88.9 | 127 |
| 5 – 3.1/2 | 141.3 | 101.6 | 127 |
| 5 – 4 | 141.3 | 114.3 | 127 |
| 6 – 2.1/2 | 168.3 | 73 | 140 |
| 6 – 3 | 168.3 | 88.9 | 140 |
| 6 – 3.1/2 | 168.3 | 101.6 | 140 |
| 6 – 4 | 168.3 | 114.3 | 140 |
| 6 – 5 | 168.3 | 141.3 | 140 |
| 8 – 3.1/2 | 219.1 | 101.6 | 152 |
| 8 – 4 | 219.1 | 114.3 | 152 |
| 8 – 5 | 219.1 | 141.3 | 152 |
| 8 – 6 | 219.1 | 168.3 | 152 |
| 10 – 4 | 273 | 114.3 | 178 |
| 10 – 5 | 273 | 141.3 | 178 |
| 10 – 6 | 273 | 168.3 | 178 |
| 10 – 8 | 273 | 219.1 | 178 |
| 12 – 5 | 323.9 | 141.3 | 203 |
| 12 – 6 | 323.9 | 168.3 | 203 |
| 12 – 8 | 323.9 | 219.1 | 203 |
| 12 – 10 | 323.9 | 273 | 203 |
| 14 – 6 | 355.6 | 168.3 | 330 |
| 14 – 8 | 355.6 | 219.1 | 330 |
| 14 – 10 | 355.6 | 273 | 330 |
| 14 – 12 | 355.6 | 323.9 | 330 |
| 16 – 8 | 406.4 | 219 | 356 |
| 16 – 10 | 406.4 | 273 | 356 |
| 16 – 12 | 406.4 | 323.9 | 356 |
| 16 – 14 | 406.4 | 355.6 | 356 |
| 18 – 10 | 457 | 273 | 381 |
| 18 – 12 | 457 | 323.9 | 381 |
| 18 – 14 | 457 | 355.6 | 381 |
| 18 – 16 | 457 | 406.4 | 381 |
| 20 – 12 | 508 | 323.9 | 508 |
| 20 – 14 | 508 | 355.6 | 508 |
| 20 – 16 | 508 | 406.4 | 508 |
| 20 – 18 | 508 | 457 | 508 |
| 22 – 14 | 559 | 355.6 | 508 |
| 22 – 16 | 559 | 406.4 | 508 |
| 22 – 18 | 559 | 457 | 508 |
| 22 – 20 | 559 | 508 | 508 |
| 24 – 16 | 610 | 406.4 | 508 |
| 24 – 18 | 610 | 457 | 508 |
| 24 – 20 | 610 | 508 | 508 |
| 24 – 22 | 610 | 559 | 508 |
| 26 – 18 | 660 | 457 | 610 |
| 26 – 20 | 660 | 508 | 610 |
| 26 – 22 | 660 | 559 | 610 |
| 26 – 24 | 660 | 610 | 610 |
| 28 – 18 | 711 | 457 | 610 |
| 28 – 20 | 711 | 508 | 610 |
| 28 – 24 | 711 | 610 | 610 |
| 28 – 26 | 711 | 660 | 610 |
| 30 – 20 | 762 | 508 | 610 |
| 30 – 24 | 762 | 610 | 610 |
| 30 – 26 | 762 | 660 | 610 |
| 30 – 28 | 762 | 711 | 610 |
| 32 – 24 | 813 | 610 | 610 |
| 32 – 26 | 813 | 660 | 610 |
| 32 – 28 | 813 | 711 | 610 |
| 32 – 30 | 813 | 762 | 610 |
| 34 – 24 | 864 | 610 | 610 |
| 34 – 26 | 864 | 660 | 610 |
| 34 – 30 | 864 | 762 | 610 |
| 34 – 32 | 864 | 813 | 610 |
| 36 – 24 | 914 | 610 | 610 |
| 36 – 26 | 914 | 660 | 610 |
| 36 – 30 | 914 | 762 | 610 |
| 36 – 32 | 914 | 813 | 610 |
| 36 – 34 | 914 | 864 | 610 |
| 38 – 26 | 965 | 660 | 610 |
| 38 – 28 | 965 | 711 | 610 |
| 38 – 30 | 965 | 762 | 610 |
| 38 – 32 | 965 | 813 | 610 |
| 38 – 34 | 965 | 864 | 610 |
| 38 – 36 | 965 | 914 | 610 |
| 40 – 30 | 1016 | 762 | 610 |
| 40 – 32 | 1016 | 813 | 610 |
| 40 – 34 | 1016 | 864 | 610 |
| 40 – 36 | 1016 | 914 | 610 |
| 40 – 38 | 1016 | 965 | 610 |
| Nominal Pipe Size | 1/2 to 2.1/2 | 3 to 3.1/2 | 4 | 5 to 8 |
| Outside Diameter at Bevel (D) | + 1.6– 0.8 | 1.6 | 1.6 | + 2.4– 1.6 |
| Inside Diameter at End | 0.8 | 1.6 | 1.6 | 1.6 |
| Overall Length (H) | 2 | 2 | 2 | 2 |
| Nominal Pipe Size | 10 to 18 | 20 to 24 | 26 to 30 | 32 to 48 |
| Outside Diameter at Bevel (D) | + 4– 3.2 | + 6.4– 4.8 | + 6.4– 4.8 | + 6.4– 4.8 |
| Inside Diameter at End | 3.2 | 4.8 | + 6.4– 4.8 | + 6.4– 4.8 |
| Overall Length (H) | 2 | 2 | 5 | 5 |
| Wall Thickness (t) | Not less than 87.5% of Nominal Wall Thickness | |||
Butt Weld Reducers
Concentric and Eccentric ASME B16.9
| NPS | O.D.D | O.D.D1 | LengthH |
| 3/4 – 1/2 | 26.7 | 21.3 | 38 |
| 1 – 1/2 | 33.4 | 21.3 | 51 |
| 1 – 3/4 | 33.4 | 26.7 | 51 |
| 1.1/4 – 1/2 | 42.2 | 21.3 | 51 |
| 1.1/4 – 3/4 | 42.2 | 26.7 | 51 |
| 1.1/4 – 1 | 42.2 | 33.4 | 51 |
| 1.1/2 – 1/2 | 48.3 | 21.3 | 64 |
| 1.1/2 – 3/4 | 48.3 | 26.7 | 64 |
| 1.1/2 – 1 | 48.3 | 33.4 | 64 |
| 1.1/2 – 1.1/4 | 48.3 | 42.2 | 64 |
| 2 – 3/4 | 60.3 | 26.7 | 76 |
| 2 – 1 | 60.3 | 33.4 | 76 |
| 2 – 1.1/4 | 60.3 | 42.2 | 76 |
| 2 – 1.1/2 | 60.3 | 48.3 | 76 |
| 2.1/2 – 1 | 73 | 33.4 | 89 |
| 2.1/2 – 1.1/4 | 73 | 42.2 | 89 |
| 2.1/2 – 1.1/2 | 73 | 48.3 | 89 |
| 2.1/2 – 2 | 73 | 60.3 | 89 |
| 3 – 1.1/4 | 88.9 | 42.2 | 89 |
| 3 – 1.1/2 | 88.9 | 48.3 | 89 |
| 3 – 2 | 88.9 | 60.3 | 89 |
| 3 – 2.1/2 | 88.9 | 73 | 89 |
| 3.1/2 – 1.1/4 | 101.6 | 42.2 | 102 |
| 3.1/2 – 1.1/2 | 101.6 | 48.3 | 102 |
| 3.1/2 – 2 | 101.6 | 60.3 | 102 |
| 3.1/2 – 2.1/2 | 101.6 | 73 | 102 |
| 3.1/2 – 3 | 101.6 | 88.9 | 102 |
| 4 – 1.1/2 | 114.3 | 48.3 | 102 |
| 4 – 2 | 114.3 | 60.3 | 102 |
| 4 – 2.1/2 | 114.3 | 73 | 102 |
| 4 – 3 | 114.3 | 88.9 | 102 |
| 4 – 3.1/2 | 114.3 | 101.6 | 102 |
| 5 – 2 | 141.3 | 60.3 | 127 |
| 5 – 2.1/2 | 141.3 | 73 | 127 |
| 5 – 3 | 141.3 | 88.9 | 127 |
| 5 – 3.1/2 | 141.3 | 101.6 | 127 |
| 5 – 4 | 141.3 | 114.3 | 127 |
| 6 – 2.1/2 | 168.3 | 73 | 140 |
| 6 – 3 | 168.3 | 88.9 | 140 |
| 6 – 3.1/2 | 168.3 | 101.6 | 140 |
| 6 – 4 | 168.3 | 114.3 | 140 |
| 6 – 5 | 168.3 | 141.3 | 140 |
| 8 – 3.1/2 | 219.1 | 101.6 | 152 |
| 8 – 4 | 219.1 | 114.3 | 152 |
| 8 – 5 | 219.1 | 141.3 | 152 |
| 8 – 6 | 219.1 | 168.3 | 152 |
| 10 – 4 | 273 | 114.3 | 178 |
| 10 – 5 | 273 | 141.3 | 178 |
| 10 – 6 | 273 | 168.3 | 178 |
| 10 – 8 | 273 | 219.1 | 178 |
| 12 – 5 | 323.9 | 141.3 | 203 |
| 12 – 6 | 323.9 | 168.3 | 203 |
| 12 – 8 | 323.9 | 219.1 | 203 |
| 12 – 10 | 323.9 | 273 | 203 |
| 14 – 6 | 355.6 | 168.3 | 330 |
| 14 – 8 | 355.6 | 219.1 | 330 |
| 14 – 10 | 355.6 | 273 | 330 |
| 14 – 12 | 355.6 | 323.9 | 330 |
| 16 – 8 | 406.4 | 219 | 356 |
| 16 – 10 | 406.4 | 273 | 356 |
| 16 – 12 | 406.4 | 323.9 | 356 |
| 16 – 14 | 406.4 | 355.6 | 356 |
| 18 – 10 | 457 | 273 | 381 |
| 18 – 12 | 457 | 323.9 | 381 |
| 18 – 14 | 457 | 355.6 | 381 |
| 18 – 16 | 457 | 406.4 | 381 |
| 20 – 12 | 508 | 323.9 | 508 |
| 20 – 14 | 508 | 355.6 | 508 |
| 20 – 16 | 508 | 406.4 | 508 |
| 20 – 18 | 508 | 457 | 508 |
| 22 – 14 | 559 | 355.6 | 508 |
| 22 – 16 | 559 | 406.4 | 508 |
| 22 – 18 | 559 | 457 | 508 |
| 22 – 20 | 559 | 508 | 508 |
| 24 – 16 | 610 | 406.4 | 508 |
| 24 – 18 | 610 | 457 | 508 |
| 24 – 20 | 610 | 508 | 508 |
| 24 – 22 | 610 | 559 | 508 |
| 26 – 18 | 660 | 457 | 610 |
| 26 – 20 | 660 | 508 | 610 |
| 26 – 22 | 660 | 559 | 610 |
| 26 – 24 | 660 | 610 | 610 |
| 28 – 18 | 711 | 457 | 610 |
| 28 – 20 | 711 | 508 | 610 |
| 28 – 24 | 711 | 610 | 610 |
| 28 – 26 | 711 | 660 | 610 |
| 30 – 20 | 762 | 508 | 610 |
| 30 – 24 | 762 | 610 | 610 |
| 30 – 26 | 762 | 660 | 610 |
| 30 – 28 | 762 | 711 | 610 |
| 32 – 24 | 813 | 610 | 610 |
| 32 – 26 | 813 | 660 | 610 |
| 32 – 28 | 813 | 711 | 610 |
| 32 – 30 | 813 | 762 | 610 |
| 34 – 24 | 864 | 610 | 610 |
| 34 – 26 | 864 | 660 | 610 |
| 34 – 30 | 864 | 762 | 610 |
| 34 – 32 | 864 | 813 | 610 |
| 36 – 24 | 914 | 610 | 610 |
| 36 – 26 | 914 | 660 | 610 |
| 36 – 30 | 914 | 762 | 610 |
| 36 – 32 | 914 | 813 | 610 |
| 36 – 34 | 914 | 864 | 610 |
| 38 – 26 | 965 | 660 | 610 |
| 38 – 28 | 965 | 711 | 610 |
| 38 – 30 | 965 | 762 | 610 |
| 38 – 32 | 965 | 813 | 610 |
| 38 – 34 | 965 | 864 | 610 |
| 38 – 36 | 965 | 914 | 610 |
| 40 – 30 | 1016 | 762 | 610 |
| 40 – 32 | 1016 | 813 | 610 |
| 40 – 34 | 1016 | 864 | 610 |
| 40 – 36 | 1016 | 914 | 610 |
| 40 – 38 | 1016 | 965 | 610 |
| Nominal Pipe Size | 1/2 to 2.1/2 | 3 to 3.1/2 | 4 | 5 to 8 |
| Outside Diameter at Bevel (D) | + 1.6– 0.8 | 1.6 | 1.6 | + 2.4– 1.6 |
| Inside Diameter at End | 0.8 | 1.6 | 1.6 | 1.6 |
| Overall Length (H) | 2 | 2 | 2 | 2 |
| Nominal Pipe Size | 10 to 18 | 20 to 24 | 26 to 30 | 32 to 48 |
| Outside Diameter at Bevel (D) | + 4– 3.2 | + 6.4– 4.8 | + 6.4– 4.8 | + 6.4– 4.8 |
| Inside Diameter at End | 3.2 | 4.8 | + 6.4– 4.8 | + 6.4– 4.8 |
| Overall Length (H) | 2 | 2 | 5 | 5 |
| Wall Thickness (t) | Not less than 87.5% of Nominal Wall Thickness | |||
Dimensions Butt Weld Caps ASME B16.9 
| NPS | O.D. D | Length H | Length H(1) |
| 1/2 | 21.3 | 25 | 25 |
| 3/4 | 26.7 | 25 | 25 |
| 1 | 33.4 | 38 | 38 |
| 1.1/4 | 42.2 | 38 | 38 |
| 1.1/2 | 48.3 | 38 | 38 |
| 2 | 60.3 | 38 | 44 |
| 2.1/2 | 73 | 38 | 51 |
| 3 | 88.9 | 51 | 64 |
| 3.1/2 | 101.6 | 64 | 76 |
| 4 | 114.3 | 64 | 76 |
| 5 | 141.3 | 76 | 89 |
| 6 | 168.3 | 89 | 102 |
| 8 | 219.1 | 102 | 127 |
| 10 | 273 | 127 | 152 |
| 12 | 323.8 | 152 | 178 |
| 14 | 355.6 | 165 | 191 |
| 16 | 406.4 | 178 | 203 |
| 18 | 457 | 203 | 229 |
| 20 | 508 | 229 | 254 |
| 22 | 559 | 254 | 254 |
| 24 | 610 | 267 | 305 |
| 26 | 660 | 267 | – |
| 28 | 711 | 267 | – |
| 30 | 762 | 267 | – |
| 32 | 813 | 267 | – |
| 34 | 864 | 237 | – |
| 36 | 914 | 267 | – |
| 38 | 965 | 305 | – |
| 40 | 1016 | 305 | – |
| 42 | 1067 | 305 | – |
| 44 | 1118 | 343 | – |
| 46 | 1168 | 343 | – |
| 48 | 1219 | 343 | – |
- Dimensions are in millimeters unless otherwise indicated.
- Wall thickness (t) must be specified by customer.
- The shape shall be ellipsoidal and shall conform to the requirements given in the ASME Boiler and Pressure Vessel Code.
- Length (H) applies for thickness not exceeding that given in column “Wall Thickness” for Length, H.
- Length (H1) applies for thickness greater than that given in column “Wall Thickness” for NPS 24 and smaller. For NPS 26 and larger, length H1 shall be by agreement between the manufacturerand purchaser.
Dimensional Tolerances of End Caps ASME B16.9
| Nominal Pipe Size | 1/2 to 2.1/2 | 3 to 3.1/2 | 4 | 5 to 8 |
| Outside Diameterat Bevel (D) | + 1.6– 0.8 | 1.6 | 1.6 | + 2.4– 1.6 |
| Inside Diameter at End | 0.8 | 1.6 | 1.6 | 1.6 |
| Overall Length (H) | 3 | 3 | 3 | 6 |
| Nominal Pipe Size | 10 to 18 | 20 to 24 | 26 to 30 | 32 to 48 |
| Outside Diameterat Bevel (D) | + 4– 3.2 | + 6.4– 4.8 | + 6.4– 4.8 | + 6.4– 4.8 |
| Inside Diameter at End | 3.2 | 4.8 | + 6.4– 4.8 | + 6.4– 4.8 |
| Overall Length (H) | 6 | 6 | 10 | 10 |
| Wall Thickness (t) | Not less than 87.5% of Nominal Wall Thickness | |||
Weights of Buttweld Caps
| NPS | STD | XS | SCH 160 | XXS |
| 1 | 0.09 | 0.14 | 0.18 | 0.23 |
| 1.1/4 | 0.14 | 0.18 | 0.23 | 0.34 |
| 1.1/2 | 0.18 | 0.23 | 0.27 | 0.41 |
| 2 | 0.27 | 0.34 | 0.57 | 0.68 |
| 2.1/2 | 0.41 | 0.45 | 0.79 | 1.13 |
| 3 | 0.68 | 0.79 | 1.32 | 1.81 |
| 3.1/2 | 0.91 | 1.13 | – | 2.72 |
| 4 | 1.13 | 1.36 | 2.68 | 3.4 |
| 5 | 2.04 | 2.49 | 4.54 | 5.44 |
| 6 | 2.95 | 4.08 | 6.8 | 8.16 |
| 8 | 5.44 | 7.26 | 14.06 | 13.61 |
| 10 | 9.07 | 11.34 | 25.85 | – |
| 12 | 13.61 | 16.33 | 43.09 | – |
| 14 | 16.33 | 20.41 | – | – |
| 16 | 18.14 | 24.49 | – | – |
| 18 | 24.49 | 32.66 | – | – |
| 20 | 34.02 | 39.01 | – | – |
| 22 | 42.64 | 56.7 | – | – |
| 24 | 43.54 | 58.97 | – | – |
| 26 | 53.98 | 72.12 | – | – |
| 30 | 78.02 | 103.87 | – | – |
Buttweld Fitting Weights
ASME buttweld fitting specifications do not specify weights for fittings. Weights quoted in the table on this page are based on manufacturers information and should be considered as approximate and provided as a guide only (fitting weights can vary considerably between manufacturers due to differences in construction). Weights in these tables are taken from Hackney Ladish, Inc. Hackney Ladish, Inc. is one of the largest and most versatile fitting producers in the world. Hackney Ladish, Inc. is headquartered in Dallas, TX and operates 2 facilities containing 380,000 square feet of manufacturing.Dimensions Lap Joint Stub Ends schedule STD XS ASME B16.9 
| NPS | OD | T | G | F | R | kg |
| 1/2 | 21.3 | 2.77 | 34.9 | 76.2 | 3.18 | 0.16 |
| 3/4 | 26.7 | 2.87 | 42.9 | 76.2 | 3.18 | 0.23 |
| 1 | 33.4 | 3.38 | 50.8 | 101.6 | 3.18 | 0.29 |
| 1.1/4 | 42.2 | 3.56 | 63.5 | 101.6 | 4.76 | 0.45 |
| 1.1/2 | 48.3 | 3.68 | 73 | 101.6 | 6.35 | 0.54 |
| 2 | 60.3 | 3.91 | 92.1 | 152.4 | 7.94 | 1 |
| 2.1/2 | 73 | 5.16 | 104.8 | 152.4 | 7.94 | 1.5 |
| 3 | 88.9 | 5.49 | 127 | 152.4 | 9.53 | 2.1 |
| 3.1/2 | 101.6 | 5.74 | 139.7 | 152.4 | 9.53 | 2.5 |
| 4 | 114.3 | 6.02 | 157.2 | 152.4 | 11.11 | 3 |
| 5 | 141.3 | 6.55 | 185.7 | 203.2 | 11.11 | 5.4 |
| 6 | 168.3 | 7.11 | 215.9 | 203.2 | 12.70 | 7.3 |
| 8 | 219.1 | 8.18 | 269.9 | 203.2 | 12.70 | 11.6 |
| 10 | 273.1 | 9.27 | 323.9 | 254 | 12.70 | 18 |
| 12 | 323.9 | 9.53 | 381 | 254 | 12.70 | 21 |
| 14 | 355.6 | 9.53 | 412.8 | 304.8 | 12.70 | 28 |
| 16 | 406.4 | 9.53 | 469.9 | 304.8 | 12.70 | 34 |
| 18 | 457.2 | 9.53 | 533.4 | 304.8 | 12.70 | 39 |
| 20 | 508 | 9.53 | 584.2 | 304.8 | 12.70 | 44 |
| 24 | 609.6 | 9.53 | 692.2 | 304.8 | 12.70 | 57 |
| NPS | OD | T | G | F | R | kg |
| 1/2 | 21.3 | 3.73 | 34.9 | 76.2 | 3.18 | 0.2 |
| 3/4 | 26.7 | 3.91 | 42.9 | 76.2 | 3.18 | 0.3 |
| 1 | 33.4 | 4.55 | 50.8 | 101.6 | 3.18 | 0.4 |
| 1.1/4 | 42.2 | 4.85 | 63.5 | 101.6 | 4.76 | 0.6 |
| 1.1/2 | 48.3 | 5.08 | 73 | 101.6 | 6.35 | 0.7 |
| 2 | 60.3 | 5.54 | 92.1 | 152.4 | 7.94 | 1.4 |
| 2.1/2 | 73 | 7.01 | 104.8 | 152.4 | 7.94 | 2 |
| 3 | 88.9 | 7.62 | 127 | 152.4 | 9.53 | 2.9 |
| 3.1/2 | 101.6 | 8.08 | 139.7 | 152.4 | 9.53 | 3.4 |
| 4 | 114.3 | 8.56 | 157.2 | 152.4 | 11.11 | 4.1 |
| 5 | 141.3 | 9.53 | 185.7 | 203.2 | 11.11 | 7.5 |
| 6 | 168.3 | 10.97 | 215.9 | 203.2 | 12.70 | 10 |
| 8 | 219.1 | 12.70 | 269.9 | 203.2 | 12.70 | 16 |
| 10 | 273.1 | 12.70 | 323.9 | 254 | 12.70 | 24 |
| 12 | 323.9 | 12.70 | 381 | 254 | 12.70 | 29 |
| 14 | 355.6 | 12.70 | 412.8 | 304.8 | 12.70 | 38 |
| 16 | 406.4 | 12.70 | 469.9 | 304.8 | 12.70 | 43 |
| 18 | 457.2 | 12.70 | 533.4 | 304.8 | 12.70 | 49 |
| 20 | 508 | 12.70 | 584.2 | 304.8 | 12.70 | 63 |
| 24 | 609.6 | 12.70 | 692.2 | 304.8 | 12.70 | 76 |
Dimensional Tolerances of Stub Ends ASME B16.9
| Nominal Pipe Size | 1/2 to 2.1/2 | 3 to 3.1/2 | 4 | 5 to 8 | 10 to 18 | 20 to 24 |
| Outside Diameter at Welding End (OD) | +1.6–0.8 | 1.6 | 1.6 | +2.29–1.6 | +4.06–3.05 | +6.35–4.83 |
| Overall Length (F) | 1.6 | 1.6 | 1.6 | 1.6 | 2 | 2 |
| Outside Diameter of Lap (G) | +0–0.76 | +0–0.76 | +0–0.76 | +0–0.76 | +0–1.6 | +0–1.6 |
| Thickness of Lap (T) | +1.52–0 | +1.52–0 | +1.52–0 | +1.52–0 | +1.52–0 | +1.52–0 |
| Fillet Radius of Lap (R) | +0–0.76 | +0–0.76 | +0–1.6 | +0–1.6 | +0–1.6 | +0–1.6 |
| Wall Thickness (t) | Not less than 87.5% of Nominal Wall Thickness | |||||
Dimensions butt welded Stub Ends
schedule 10S MSS SP-43 type A/B
| NPS | OD | T | G | F | R Type A | R Type B |
| 1/2 | 21.3 | 2.11 | 34.9 | 50.8 | 3.05 | 0.76 |
| 3/4 | 26.7 | 2.11 | 42.9 | 50.8 | 3.05 | 0.76 |
| 1 | 33.4 | 2.77 | 50.8 | 50.8 | 3.05 | 0.76 |
| 1.1/4 | 42.2 | 2.77 | 63.5 | 50.8 | 4.83 | 0.76 |
| 1.1/2 | 48.3 | 2.77 | 73 | 50.8 | 6.35 | 0.76 |
| 2 | 60.3 | 2.77 | 92.1 | 63.5 | 7.87 | 0.76 |
| 2.1/2 | 73 | 3.05 | 104.8 | 63.5 | 7.87 | 0.76 |
| 3 | 88.9 | 3.05 | 127 | 63.5 | 9.65 | 0.76 |
| 3.1/2 | 101.6 | 3.05 | 139.7 | 76.2 | 9.65 | 0.76 |
| 4 | 114.3 | 3.05 | 157.2 | 76.2 | 11.18 | 0.76 |
| 5 | 141.3 | 3.40 | 185.7 | 76.2 | 11.18 | 1.52 |
| 6 | 168.3 | 3.40 | 215.9 | 88.9 | 12.7 | 1.52 |
| 8 | 219.1 | 3.76 | 269.9 | 101.6 | 12.7 | 1.52 |
| 10 | 273.1 | 4.19 | 323.9 | 127 | 12.7 | 1.52 |
| 12 | 323.9 | 4.57 | 381 | 152.4 | 12.7 | 1.52 |
| 14 | 355.6 | 4.78 | 412.8 | 152.4 | 12.70 | 1.52 |
| 16 | 406.4 | 4.78 | 469.9 | 152.4 | 12.7 | 1.52 |
| 18 | 457.2 | 4.78 | 533.4 | 152.4 | 12.70 | 1.52 |
| 20 | 508 | 5.54 | 584.2 | 152.4 | 12.70 | 1.52 |
| 24 | 609.6 | 6.35 | 692.2 | 152.4 | 12.7 | 1.52 |
| Nominal Pipe Size | 1/2 to 2.1/2 | 3 to 3.1/2 | 4 | 5 to 8 | 10 to 18 | 20 to 24 |
| Outside Diameter at Welding End (OD) | 0.8 | 0.8 | 0.8 | +1.6–0.8 | +2.29–0.76 | +3.05–0.76 |
| Overall Length (F) | 1.6 | 1.6 | 1.6 | 1.6 | 2 | 2 |
| Outside Diameter of Lap (G) | +0–0.76 | +0–0.76 | +0–0.76 | +0–0.76 | +0–1.6 | +0–1.6 |
| Thickness of Lap (T) | +1.52–0 | +1.52–0 | +1.52–0 | +1.52–0 | +1.52–0 | +1.52–0 |
| Fillet Radius of Lap (R) | +0–0.76 | +0–0.76 | +0–1.6 | +0–1.6 | +0–1.6 | +0–1.6 |
| Wall Thickness (t) | Not less than 87.5% of Nominal Wall Thickness | |||||
- Type A for Lap Joint Flanges
- Type B for Slip On Flanges
- MSS SP-43 only covers stainless steel buttweld fittings made for use with Schedule 5S and 10S pipe and Stub Ends suitable for use with Schedule 40S pipe, as defined in ASME B36.19. The dimensions and dimensional tolerances defined in MSS SP-43 are substantially the same as those in ASME B16.9 specifications from NPS 1/2 – NPS 24. Except with regard to the outside diameter at the bevel.