Flat Face Flanges: Precision and Reliability by Fortune Fittings Pvt. Ltd.
Flat Face Flanges are crucial components in various piping and plumbing systems. At Fortune Fittings Pvt. Ltd., we specialize in manufacturing high-quality flat face flanges that adhere to stringent industry standards, making us a leading supplier in the industry.
What is a Flat Face Flange?
A Flat Face Flange features a flat surface on the face of the flange, which makes contact with the mating flange face, also flat, to create a seal between the two flanges. These flanges are typically used in applications where there is no need to align or center the pipes or equipment being connected. Flat Face Flanges are ideal for situations where pressure and temperature requirements are moderate.
Types of Flat Face Flanges
At Fortune Fittings Pvt. Ltd., we offer a comprehensive range of flat face flanges designed to meet various industrial needs:
- Slip-On Flanges: Easy to install and suitable for low-pressure applications.
- Weld Neck Flanges: Ideal for high-pressure applications, providing added strength with a long tapered hub.
- Blind Flanges: Used to close the end of a piping system, preventing flow.
- Threaded Flanges: Suitable for small-diameter pipes in low-pressure applications, allowing easy connection with threading.
Fortune Fittings Pvt. Ltd.: Quality and Precision
Fortune Fittings Pvt. Ltd. is India’s most trusted manufacturer of industrial flanges, including flat face flanges. Known for our high-quality products and reliable customer service, we produce flat face flanges in various sizes, materials, and pressure ratings to meet the diverse needs of our clients. Our commitment to precision manufacturing and attention to detail has established us as a trusted supplier in the industry.
Standard Specifications
Our flat face flanges comply with the following standards:
- Standards: ANSI B16.5, ANSI B16.47, ANSI B16.36, ANSI B16.48, BS 4504, EN1092, UNI 2277/2278, DIN, JIS, SABS1123, GOST-12820
- Forms: SORF, WNRF, BLRF, SWRF, LAP Joint, Threaded, Reducing, Spectacle
- BS/JIS: BS4504, BS1560, BS10, 5K, 10K, 16K, 20K, 30K, 40K, 63K
- Face Type: Flat Face (FF)
- Dimensions: ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings
- Size Range: From ½” (15 NB) to 48″ (1200 NB)
- Class: 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS, DIN Standard ND-6, 10, 16, 25, 40
- Connection Types: RTJ, Lap-Joint Face, Raised Face, Flat Face, Large Male-Female, Small Male-Female, Large Tongue & Groove, Small Tongue & Groove.
Installation and Gaskets
Flat Face Flanges require the use of a gasket to create a seal between the flanges. The gasket is placed between the flat faces of the flanges and compressed when the bolts are tightened, forming a tight seal. The type of gasket used depends on the specific application and the materials of the flanges.
Ready Inventory and Custom Solutions
We maintain a ready inventory of flat face flanges in various sizes, including 10-inch and 3-inch FF flanges. Additionally, we offer custom solutions to meet specific requirements, ensuring our clients receive the best products and services.
Material Comparison and Applications
We offer flat face flanges in a variety of materials to suit different industrial applications:
- Stainless Steel: 304/304L, 316/316L, 904L
- Alloy Steel: Alloy 20, Nickel 200, Monel, Inconel, Hastelloy C22
- Carbon Steel
- Duplex Steel: 2205
- Others: Titanium, Copper Nickel, SMO 254, Aluminum, Galvanized, MS Flat Face Flange
These materials ensure durability and performance in corrosive environments, moderate pressures, and temperatures. Flat Face Flanges are commonly used in industries such as petrochemical, oil and gas, and water treatment.
Why Choose Fortune Fittings Pvt. Ltd.?
- Unmatched Quality: Our flanges are manufactured to the highest standards, ensuring reliability and durability.
- Expertise: With years of experience, our team provides technical support and assistance in product selection and customization.
- Customer Satisfaction: We are committed to delivering exceptional customer service and ensuring our clients’ needs are met promptly and efficiently.
Conclusion
For reliable and high-quality flat face flanges, Fortune Fittings Pvt. Ltd. is your go-to manufacturer. With our dedication to quality, precision, and customer satisfaction, we are poised to meet the demanding needs of various industries. Contact us today to get the best prices and discover how we can support your projects with our premium flat face flanges.
Flanges Dimensions
Dimensions Weld Neck Flanges & Stud Bolts
ASME B16.5
OTHER DIA | NPS 1/2 – O.D. 21.3 | |||||
CLass | 150 | 300 | 600 | 900 | 1500 | 2500 |
DIA A | 30 | 38 | 38 | 38 | 38 | 43 |
DIA D | 90 | 95 | 95 | 120 | 120 | 135 |
THK B | 11.2 | 14.3 | 20.7 | 28.7 | 28.7 | 36.6 |
DIA G | 35.1 | 35.1 | 35.1 | 35.1 | 35.1 | 35.1 |
DIA K | 60.3 | 66.7 | 66.7 | 82.6 | 82.6 | 88.9 |
H | 47.6 | 52.6 | 58.4 | 66.4 | 66.4 | 79.4 |
NO. L | 4 | 4 | 4 | 4 | 4 | 4 |
DIA L | 15.9 | 15.9 | 15.9 | 22.2 | 22.2 | 22.2 |
Stud Bolts Diameter x Length | ||||||
DIA (in) | 1/2 | 1/2 | 1/2 | 3/4 | 3/4 | 3/4 |
lgth (mm) | 55 | 65 | 75 | 110 | 110 | 120 |
- IMPORTANT! please read this short article
Dimensional Tolerances of Weld Neck Flanges ASME B16.5
Outside Diameter * Tolerances not listed in ASME B16.5 2013≤241.6 mm (0.06 in)>24±3.2 mm (±0.12 in) Diameter Hub at Base ≤241.6 mm (0.06 in)>24±3.2 mm (±0.12 in) Inside Diameter ≤10±0.8 mm (±0.03 in)12 thru 181.6 mm (0.06 in)≥20+3.2 mm / -1.6 mm(±0.12 in / -0.06 in) Diameter Hub at Point of Welding ≤5+2.4 mm / -0.8 mm(±0.09 in / -0.03 in)≥6+4.0 mm / -0.8 mm(+0.15 in / -0.03 in) Drilling Bolt Circle1.6 mm (0.06 in)Bolt Hole Spacing±0.8 mm (±0.03 in) Eccentricity Bolt Circle ≤2.1/20.8 mm max (0.03 in max)≥31.6 mm max (0.06 in max) Thickness ≤18+3.2 mm / -0 (+0.12 in / -0)≥20+4.8 mm / -0 (+0.18 in / -0) Length thru Hub ≤101.6 mm (0.06 in)≥12±3.2 mm (±0.12 in) Diameter Contact Face 1.6 mm RF (0.06 in)±0.8 mm (±0.03 in)6.35 mm RF (0.25 in)±0.4 mm (±0.01 in) Tongue and Groove±0.4 mm (±0.01 in)Male-Female±0.4 mm (±0.01 in) Studs are measured parallel to the axis (L) from the first to the threadwithout the chamfers (points). S = free threads equals 1/3 time bolt dia Hex bolts are measured from under the head to the top of de boltDimensions Slip On Flanges & Stud Bolts
ASME B16.5
OTHER DIA | NPS 1/2 ID 22.3 | |||||
CLass | 150 | 300 | 600 | 900 | 1500 | 2500 |
DIA A | 30 | 38 | 38 | 38 | 38 | … |
DIA D | 90 | 95 | 95 | 120 | 120 | … |
THK B | 11.2 | 14.3 | 20.7 | 28.7 | 28.7 | … |
DIA G | 35.1 | 35.1 | 35.1 | 35.1 | 35.1 | … |
DIA K | 60.3 | 66.7 | 66.7 | 82.6 | 82.6 | … |
H | 15.6 | 22.6 | 28.4 | 38.4 | 38.4 | … |
NO. L | 4 | 4 | 4 | 4 | 4 | … |
DIA L | 15.9 | 15.9 | 15.9 | 22.2 | 22.2 | … |
Stud Bolts Diameter x Length | ||||||
DIA (in) | 1/2 | 1/2 | 1/2 | 3/4 | 3/4 | … |
lgth (mm) | 55 | 65 | 75 | 110 | 110 | … |
- IMPORTANT! please read this short article
Dimensional Tolerances of Weld Neck Flanges ASME B16.5
Outside Diameter * Tolerances not listed in ASME B16.5 2013≤24 = 1.6 mm (0.06 in)>24 = ±3.2 mm (±0.12 in) Inside Diameter ≤ 10 = ± 0.8 mm≥ 12 = + 1.6 mm / – 0 mm Outside Diameter of Hub ≤ 12 = + 2.4 mm / – 1.6 mm≥ 14 = ± 3.2 mm Diameter of Counterbore Same as for Inside Diameter Drilling Bolt Circle = 1.6 mmBolt Hole Spacing = ± 0.8 mm Eccentricity of Bolt Circle ≤ 2.1/2 = 0.8 mm max.≥ 3 = 1.6 mm max. Thickness ≤ 18 = + 3.2 mm / – 0≥ 20 = + 4.8 mm / – 0 Length thru Hub ≤ 18 = + 3.2 mm / – 0.8 mm≥ 20 = + 4.8 mm / – 1.6 mm Diameter of Contact Face 1.6 mm Raised Face = ± 0.8 mm6.35 mm Raised FaceTongue and Groove / Male-Female± 0.4 mmDimensions Socket Weld Flanges & Stud Bolts
ASME B16.5
OTHER DIA | NPS 1/2 ID=22.3 F=9.5 | |||||
CLass | 150 | 300 | 600 | 900 | 1500 | 2500 |
DIA A | 30 | 38 | 38 | … | 38 | … |
DIA D | 90 | 95 | 95 | … | 120 | … |
THK B | 11.2 | 14.3 | 20.7 | … | 28.7 | … |
DIA G | 35.1 | 35.1 | 35.1 | … | 35.1 | … |
DIA K | 60.3 | 66.7 | 66.7 | … | 82.6 | … |
H | 15.6 | 22.6 | 28.4 | … | 38.4 | … |
NO. L | 4 | 4 | 4 | … | 4 | … |
DIA L | 15.9 | 15.9 | 15.9 | … | 22.2 | … |
Stud Bolts Diameter x Length | ||||||
DIA (in) | 1/2 | 1/2 | 1/2 | … | 3/4 | … |
lgth (mm) | 55 | 65 | 75 | … | 110 | … |
- ID 2 = Depending on the wall thickness of the pipe, must bespecified by the purchaser.
- IMPORTANT! please read this short article
Dimensional Tolerances of Socket Weld Flanges ASME B16.5
Outside Diameter * Tolerances not listed in ASME B16.5 2013≤ 24 = 1.6 mm> 24 = ± 3.2 mm Inside Diameter ≤ 10 = ± 0.8 mm≥ 12 = + 1.6 mm / – 0 mm Outside Diameter of Hub ≤ 12 = + 2.4 mm / – 1.6 mm≥ 14 = ± 3.2 mm Diameter of Counterbore Same as for Inside Diameter Drilling Bolt Circle = 1.6 mmBolt Hole Spacing = ± 0.8 mm Eccentricity of Bolt Circle ≤ 2.1/2 = 0.8 mm max.≥ 3 = 1.6 mm max. Thickness ≤ 18 = + 3.2 mm / – 0≥ 20 = + 4.8 mm / – 0 Length thru Hub ≤ 18 = + 3.2 mm / – 0.8 mm≥ 20 = + 4.8 mm / – 1.6 mm Diameter of Contact Face 1.6 mm Raised Face = ± 0.8 mm6.35 mm Raised FaceTongue and Groove / Male-Female± 0.4 mm Studs are measured parallel to the axis (L) from the first to the threadwithout the chamfers (points). S = free threads equals 1/3 time bolt dia Hex bolts are measured from under the head to the top of de boltDimensions Lap Joint Flanges & Stud Bolts
ASME B16.5
OTHER DIA | NPS 1/2 ID=22.9 r=3 | |||||
CLass | 150 | 300 | 600 | 900 | 1500 | 2500 |
DIA A | 30 | 38 | 38 | 38 | 38 | 43 |
DIA D | 90 | 95 | 95 | 120 | 120 | 135 |
THK B | 11.2 | 14.3 | 14.3 | 22.3 | 22.3 | 30.2 |
DIA K | 60.3 | 66.7 | 66.7 | 82.6 | 82.6 | 88.9 |
H | 16 | 22 | 22 | 32 | 32 | 40 |
NO. L | 4 | 4 | 4 | 4 | 4 | 4 |
DIA L | 15.9 | 15.9 | 15.9 | 22.2 | 22.2 | 22.2 |
Stud Bolts Diameter x Length | ||||||
DIA (in) | 1/2 | 1/2 | 1/2 | 3/4 | 3/4 | 3/4 |
lgth (mm) | 55 | 65 | 75 | 110 | 110 | 120 |
- IMPORTANT! please read this short article
Dimensional Tolerances of Lap Joint Flanges ASME B16.5
Outside Diameter * Tolerances not listed in ASME B16.5 2013≤ 24 = 1.6 mm> 24 = ± 3.2 mm Inside Diameter ≤ 10 = ± 0.8 mm≥ 12 = + 1.6 mm / – 0 mm Outside Diameter of Hub ≤ 12 = + 2.4 mm / – 1.6 mm≥ 14 = ± 3.2 mm Diameter of Counterbore Same as for Inside Diameter Drilling Bolt Circle = 1.6 mmBolt Hole Spacing = ± 0.8 mm Eccentricity of Bolt Circle ≤ 2.1/2 = 0.8 mm max.≥ 3 = 1.6 mm max. Thickness ≤ 18 = + 3.2 mm / – 0≥ 20 = + 4.8 mm / – 0 Length thru Hub ≤ 18 = + 3.2 mm / – 0.8 mm≥ 20 = + 4.8 mm / – 1.6 mm Diameter of Contact Face 1.6 mm Raised Face = ± 0.8 mm6.35 mm Raised FaceTongue and Groove / Male-Female± 0.4 mm Studs are measured parallel to the axis (L) from the first to the threadwithout the chamfers (points). S = free threads equals 1/3 time bolt dia Hex bolts are measured from under the head to the top of de boltDimensions Threaded Flanges & Stud Bolts
ASME B16.5
OTHER DIA | NPS 1/2 | |||||
CLass | 150 | 300 | 600 | 900 | 1500 | 2500 |
DIA A | 30 | 38 | 38 | 38 | 38 | 43 |
DIA D | 90 | 95 | 95 | 120 | 120 | 135 |
THK B | 11.2 | 14.3 | 20.7 | 28.7 | 28.7 | 36.6 |
DIA G | 35.1 | 35.1 | 35.1 | 35.1 | 35.1 | 35.1 |
DIA K | 60.3 | 66.7 | 66.7 | 82.6 | 82.6 | 88.9 |
H | 15.6 | 22.6 | 28.4 | 38.4 | 38.4 | 46.4 |
NO. L | 4 | 4 | 4 | 4 | 4 | 4 |
DIA L | 15.9 | 15.9 | 15.9 | 22.2 | 22.2 | 22.2 |
Stud Bolts Diameter x Length | ||||||
DIA (in) | 1/2 | 1/2 | 1/2 | 3/4 | 3/4 | 3/4 |
lgth (mm) | 55 | 65 | 75 | 110 | 110 | 120 |
- IMPORTANT! please read this short article
Dimensional Tolerances of Threaded Flanges ASME B16.5
Outside Diameter * Tolerances not listed in ASME B16.5 2013≤ 24 = 1.6 mm> 24 = ± 3.2 mm Inside Diameter Within Limits on Boring Gauge Drilling Bolt Circle = 1.6 mmBolt Hole Spacing = ± 0.8 mm Eccentricity of Bolt Circle ≤ 2.1/2 = 0.8 mm max.≥ 3 = 1.6 mm max. Outside Diameter of Hub ≤ 12 = + 2.4 mm / – 1.6 mm≥ 14 = ± 3.2 mm Diameter of Counterbore Same as forInside Diameter Thickness ≤ 18 = + 3.2 mm / – 0≥ 20 = + 4.8 mm / – 0 Length thru Hub ≤ 18 = + 3.2 mm / – 0.8 mm≥ 20 = + 4.8 mm / – 1.6 mm Diameter of Contact Face 1.6 mm Raised Face = ± 0.8 mm6.35 mm Raised FaceTongue and Groove / Male-Female± 0.4 mm Studs are measured parallel to the axis (L) from the first to the threadwithout the chamfers (points). S = free threads equals 1/3 time bolt dia Hex bolts are measured from under the head to the top of de boltDimensions Blind Flanges & Stud Bolts
ASME B16.5
OTHER DIA | NPS 1/2 | |||||
CLass | 150 | 300 | 600 | 900 | 1500 | 2500 |
DIA D | 90 | 95 | 95 | 120 | 120 | 135 |
B | 11.2 | 14.3 | 20.7 | 28.7 | 28.7 | 36.6 |
DIA G | 35.1 | 35.1 | 35.1 | 35.1 | 35.1 | 35.1 |
DIA K | 60.3 | 66.7 | 66.7 | 82.6 | 82.6 | 88.9 |
NO. L | 4 | 4 | 4 | 4 | 4 | 4 |
DIA L | 15.9 | 15.9 | 15.9 | 22.2 | 22.2 | 22.2 |
Stud Bolts Diameter x Length | ||||||
DIA (in) | 1/2 | 1/2 | 1/2 | 3/4 | 3/4 | 3/4 |
lgth (mm) | 55 | 65 | 75 | 110 | 110 | 120 |
- IMPORTANT! please read this short article
Dimensional Tolerances of Blind Flanges ASME B16.5
Outside Diameter * Tolerances not listed in ASME B16.5 2013≤ 24 = 1.6 mm> 24 = ± 3.2 mm Inside Diameter not applicable Outside Diameter of Hub ≤ 12 = + 2.4 mm / – 1.6 mm≥ 14 = ± 3.2 mm Outside Diameter of Hub ≤ 12 = + 2.4 mm / – 1.6 mm≥ 14 = ± 3.2 mm Drilling Bolt Circle = 1.6 mmBolt Hole Spacing = ± 0.8 mm Eccentricity of Bolt Circle ≤ 2.1/2 = 0.8 mm max.≥ 3 = 1.6 mm max. Thickness ≤ 18 = + 3.2 mm / – 0≥ 20 = + 4.8 mm / – 0 Length thru Hub ≤ 18 = + 3.2 mm / – 0.8 mm≥ 20 = + 4.8 mm / – 1.6 mm Diameter of Contact Face 1.6 mm Raised Face = ± 0.8 mm6.35 mm Raised FaceTongue and Groove / Male-Female ± 0.4 mm Studs are measured parallel to the axis (L) from the first to the threadwithout the chamfers (points). S = free threads equals 1/3 time bolt dia Hex bolts are measured from under the head to the top of de bolt