NipoFlange: Your Trusted Partner in Industrial Flanges
NipoFlange emerges as a reliable provider of industrial flanges, catering to diverse needs across various sectors. With a commitment to quality, precision, and customer satisfaction, NipoFlange has established itself as a trusted partner in the industry.
Comprehensive Product Range
At NipoFlange, we offer a comprehensive range of flanges designed to meet the stringent requirements of modern industrial applications. Our product lineup includes:
Weld Neck Flanges: Ideal for high-pressure applications, providing a strong and leak-resistant connection between pipes or fittings.
Slip-On Flanges: Easy to install and suitable for low-pressure applications, offering versatility and cost-effectiveness.
Blind Flanges: Used to seal the end of a piping system, providing a tight closure and preventing leakage.
Threaded Flanges: Equipped with threads for easy installation, suitable for applications where welding is not feasible.
Lap Joint Flanges: Featuring a two-piece design, allowing for easy disassembly and maintenance of piping systems.
Spectacle Blind Flanges: Utilized to temporarily or permanently block off sections of pipelines during maintenance or repair work.
Customization and Flexibility
At NipoFlange, we understand that each project comes with its unique requirements. That’s why we offer customization options to tailor our flanges according to your specific needs. Whether it’s size, material, or special design considerations, our team is dedicated to delivering solutions that meet your exact specifications.
Stringent Quality Control
Quality is at the forefront of everything we do at NipoFlange. We adhere to strict quality control measures at every stage of the manufacturing process to ensure that our flanges meet the highest standards of reliability, durability, and performance. From material selection to final inspection, we leave no stone unturned in delivering superior-quality products to our customers.
Industry Standards and Certifications
Our commitment to quality is further underscored by our compliance with industry standards and certifications. NipoFlange products adhere to ANSI, ASME, DIN, BS, and other international standards, ensuring compatibility, interoperability, and peace of mind for our customers.
Conclusion
For the best prices and a wide selection of NipoFlanges, visit our website or contact us directly. Trust Fortune Fittings Pvt. Ltd. for all your flange needs, and experience superior quality and service.
Flanges Dimensions
Dimensions Weld Neck Flanges & Stud Bolts
ASME B16.5
OTHER DIA | NPS 1/2 – O.D. 21.3 | |||||
CLass | 150 | 300 | 600 | 900 | 1500 | 2500 |
DIA A | 30 | 38 | 38 | 38 | 38 | 43 |
DIA D | 90 | 95 | 95 | 120 | 120 | 135 |
THK B | 11.2 | 14.3 | 20.7 | 28.7 | 28.7 | 36.6 |
DIA G | 35.1 | 35.1 | 35.1 | 35.1 | 35.1 | 35.1 |
DIA K | 60.3 | 66.7 | 66.7 | 82.6 | 82.6 | 88.9 |
H | 47.6 | 52.6 | 58.4 | 66.4 | 66.4 | 79.4 |
NO. L | 4 | 4 | 4 | 4 | 4 | 4 |
DIA L | 15.9 | 15.9 | 15.9 | 22.2 | 22.2 | 22.2 |
Stud Bolts Diameter x Length | ||||||
DIA (in) | 1/2 | 1/2 | 1/2 | 3/4 | 3/4 | 3/4 |
lgth (mm) | 55 | 65 | 75 | 110 | 110 | 120 |
- IMPORTANT! please read this short article
Dimensional Tolerances of Weld Neck Flanges ASME B16.5
Outside Diameter * Tolerances not listed in ASME B16.5 2013≤241.6 mm (0.06 in)>24±3.2 mm (±0.12 in) Diameter Hub at Base ≤241.6 mm (0.06 in)>24±3.2 mm (±0.12 in) Inside Diameter ≤10±0.8 mm (±0.03 in)12 thru 181.6 mm (0.06 in)≥20+3.2 mm / -1.6 mm(±0.12 in / -0.06 in) Diameter Hub at Point of Welding ≤5+2.4 mm / -0.8 mm(±0.09 in / -0.03 in)≥6+4.0 mm / -0.8 mm(+0.15 in / -0.03 in) Drilling Bolt Circle1.6 mm (0.06 in)Bolt Hole Spacing±0.8 mm (±0.03 in) Eccentricity Bolt Circle ≤2.1/20.8 mm max (0.03 in max)≥31.6 mm max (0.06 in max) Thickness ≤18+3.2 mm / -0 (+0.12 in / -0)≥20+4.8 mm / -0 (+0.18 in / -0) Length thru Hub ≤101.6 mm (0.06 in)≥12±3.2 mm (±0.12 in) Diameter Contact Face 1.6 mm RF (0.06 in)±0.8 mm (±0.03 in)6.35 mm RF (0.25 in)±0.4 mm (±0.01 in) Tongue and Groove±0.4 mm (±0.01 in)Male-Female±0.4 mm (±0.01 in) Studs are measured parallel to the axis (L) from the first to the threadwithout the chamfers (points). S = free threads equals 1/3 time bolt dia Hex bolts are measured from under the head to the top of de boltDimensions Slip On Flanges & Stud Bolts
ASME B16.5
OTHER DIA | NPS 1/2 ID 22.3 | |||||
CLass | 150 | 300 | 600 | 900 | 1500 | 2500 |
DIA A | 30 | 38 | 38 | 38 | 38 | … |
DIA D | 90 | 95 | 95 | 120 | 120 | … |
THK B | 11.2 | 14.3 | 20.7 | 28.7 | 28.7 | … |
DIA G | 35.1 | 35.1 | 35.1 | 35.1 | 35.1 | … |
DIA K | 60.3 | 66.7 | 66.7 | 82.6 | 82.6 | … |
H | 15.6 | 22.6 | 28.4 | 38.4 | 38.4 | … |
NO. L | 4 | 4 | 4 | 4 | 4 | … |
DIA L | 15.9 | 15.9 | 15.9 | 22.2 | 22.2 | … |
Stud Bolts Diameter x Length | ||||||
DIA (in) | 1/2 | 1/2 | 1/2 | 3/4 | 3/4 | … |
lgth (mm) | 55 | 65 | 75 | 110 | 110 | … |
- IMPORTANT! please read this short article
Dimensional Tolerances of Weld Neck Flanges ASME B16.5
Outside Diameter * Tolerances not listed in ASME B16.5 2013≤24 = 1.6 mm (0.06 in)>24 = ±3.2 mm (±0.12 in) Inside Diameter ≤ 10 = ± 0.8 mm≥ 12 = + 1.6 mm / – 0 mm Outside Diameter of Hub ≤ 12 = + 2.4 mm / – 1.6 mm≥ 14 = ± 3.2 mm Diameter of Counterbore Same as for Inside Diameter Drilling Bolt Circle = 1.6 mmBolt Hole Spacing = ± 0.8 mm Eccentricity of Bolt Circle ≤ 2.1/2 = 0.8 mm max.≥ 3 = 1.6 mm max. Thickness ≤ 18 = + 3.2 mm / – 0≥ 20 = + 4.8 mm / – 0 Length thru Hub ≤ 18 = + 3.2 mm / – 0.8 mm≥ 20 = + 4.8 mm / – 1.6 mm Diameter of Contact Face 1.6 mm Raised Face = ± 0.8 mm6.35 mm Raised FaceTongue and Groove / Male-Female± 0.4 mmDimensions Socket Weld Flanges & Stud Bolts
ASME B16.5
OTHER DIA | NPS 1/2 ID=22.3 F=9.5 | |||||
CLass | 150 | 300 | 600 | 900 | 1500 | 2500 |
DIA A | 30 | 38 | 38 | … | 38 | … |
DIA D | 90 | 95 | 95 | … | 120 | … |
THK B | 11.2 | 14.3 | 20.7 | … | 28.7 | … |
DIA G | 35.1 | 35.1 | 35.1 | … | 35.1 | … |
DIA K | 60.3 | 66.7 | 66.7 | … | 82.6 | … |
H | 15.6 | 22.6 | 28.4 | … | 38.4 | … |
NO. L | 4 | 4 | 4 | … | 4 | … |
DIA L | 15.9 | 15.9 | 15.9 | … | 22.2 | … |
Stud Bolts Diameter x Length | ||||||
DIA (in) | 1/2 | 1/2 | 1/2 | … | 3/4 | … |
lgth (mm) | 55 | 65 | 75 | … | 110 | … |
- ID 2 = Depending on the wall thickness of the pipe, must bespecified by the purchaser.
- IMPORTANT! please read this short article
Dimensional Tolerances of Socket Weld Flanges ASME B16.5
Outside Diameter * Tolerances not listed in ASME B16.5 2013≤ 24 = 1.6 mm> 24 = ± 3.2 mm Inside Diameter ≤ 10 = ± 0.8 mm≥ 12 = + 1.6 mm / – 0 mm Outside Diameter of Hub ≤ 12 = + 2.4 mm / – 1.6 mm≥ 14 = ± 3.2 mm Diameter of Counterbore Same as for Inside Diameter Drilling Bolt Circle = 1.6 mmBolt Hole Spacing = ± 0.8 mm Eccentricity of Bolt Circle ≤ 2.1/2 = 0.8 mm max.≥ 3 = 1.6 mm max. Thickness ≤ 18 = + 3.2 mm / – 0≥ 20 = + 4.8 mm / – 0 Length thru Hub ≤ 18 = + 3.2 mm / – 0.8 mm≥ 20 = + 4.8 mm / – 1.6 mm Diameter of Contact Face 1.6 mm Raised Face = ± 0.8 mm6.35 mm Raised FaceTongue and Groove / Male-Female± 0.4 mm Studs are measured parallel to the axis (L) from the first to the threadwithout the chamfers (points). S = free threads equals 1/3 time bolt dia Hex bolts are measured from under the head to the top of de boltDimensions Lap Joint Flanges & Stud Bolts
ASME B16.5
OTHER DIA | NPS 1/2 ID=22.9 r=3 | |||||
CLass | 150 | 300 | 600 | 900 | 1500 | 2500 |
DIA A | 30 | 38 | 38 | 38 | 38 | 43 |
DIA D | 90 | 95 | 95 | 120 | 120 | 135 |
THK B | 11.2 | 14.3 | 14.3 | 22.3 | 22.3 | 30.2 |
DIA K | 60.3 | 66.7 | 66.7 | 82.6 | 82.6 | 88.9 |
H | 16 | 22 | 22 | 32 | 32 | 40 |
NO. L | 4 | 4 | 4 | 4 | 4 | 4 |
DIA L | 15.9 | 15.9 | 15.9 | 22.2 | 22.2 | 22.2 |
Stud Bolts Diameter x Length | ||||||
DIA (in) | 1/2 | 1/2 | 1/2 | 3/4 | 3/4 | 3/4 |
lgth (mm) | 55 | 65 | 75 | 110 | 110 | 120 |
- IMPORTANT! please read this short article
Dimensional Tolerances of Lap Joint Flanges ASME B16.5
Outside Diameter * Tolerances not listed in ASME B16.5 2013≤ 24 = 1.6 mm> 24 = ± 3.2 mm Inside Diameter ≤ 10 = ± 0.8 mm≥ 12 = + 1.6 mm / – 0 mm Outside Diameter of Hub ≤ 12 = + 2.4 mm / – 1.6 mm≥ 14 = ± 3.2 mm Diameter of Counterbore Same as for Inside Diameter Drilling Bolt Circle = 1.6 mmBolt Hole Spacing = ± 0.8 mm Eccentricity of Bolt Circle ≤ 2.1/2 = 0.8 mm max.≥ 3 = 1.6 mm max. Thickness ≤ 18 = + 3.2 mm / – 0≥ 20 = + 4.8 mm / – 0 Length thru Hub ≤ 18 = + 3.2 mm / – 0.8 mm≥ 20 = + 4.8 mm / – 1.6 mm Diameter of Contact Face 1.6 mm Raised Face = ± 0.8 mm6.35 mm Raised FaceTongue and Groove / Male-Female± 0.4 mm Studs are measured parallel to the axis (L) from the first to the threadwithout the chamfers (points). S = free threads equals 1/3 time bolt dia Hex bolts are measured from under the head to the top of de boltDimensions Threaded Flanges & Stud Bolts
ASME B16.5
OTHER DIA | NPS 1/2 | |||||
CLass | 150 | 300 | 600 | 900 | 1500 | 2500 |
DIA A | 30 | 38 | 38 | 38 | 38 | 43 |
DIA D | 90 | 95 | 95 | 120 | 120 | 135 |
THK B | 11.2 | 14.3 | 20.7 | 28.7 | 28.7 | 36.6 |
DIA G | 35.1 | 35.1 | 35.1 | 35.1 | 35.1 | 35.1 |
DIA K | 60.3 | 66.7 | 66.7 | 82.6 | 82.6 | 88.9 |
H | 15.6 | 22.6 | 28.4 | 38.4 | 38.4 | 46.4 |
NO. L | 4 | 4 | 4 | 4 | 4 | 4 |
DIA L | 15.9 | 15.9 | 15.9 | 22.2 | 22.2 | 22.2 |
Stud Bolts Diameter x Length | ||||||
DIA (in) | 1/2 | 1/2 | 1/2 | 3/4 | 3/4 | 3/4 |
lgth (mm) | 55 | 65 | 75 | 110 | 110 | 120 |
- IMPORTANT! please read this short article
Dimensional Tolerances of Threaded Flanges ASME B16.5
Outside Diameter * Tolerances not listed in ASME B16.5 2013≤ 24 = 1.6 mm> 24 = ± 3.2 mm Inside Diameter Within Limits on Boring Gauge Drilling Bolt Circle = 1.6 mmBolt Hole Spacing = ± 0.8 mm Eccentricity of Bolt Circle ≤ 2.1/2 = 0.8 mm max.≥ 3 = 1.6 mm max. Outside Diameter of Hub ≤ 12 = + 2.4 mm / – 1.6 mm≥ 14 = ± 3.2 mm Diameter of Counterbore Same as forInside Diameter Thickness ≤ 18 = + 3.2 mm / – 0≥ 20 = + 4.8 mm / – 0 Length thru Hub ≤ 18 = + 3.2 mm / – 0.8 mm≥ 20 = + 4.8 mm / – 1.6 mm Diameter of Contact Face 1.6 mm Raised Face = ± 0.8 mm6.35 mm Raised FaceTongue and Groove / Male-Female± 0.4 mm Studs are measured parallel to the axis (L) from the first to the threadwithout the chamfers (points). S = free threads equals 1/3 time bolt dia Hex bolts are measured from under the head to the top of de boltDimensions Blind Flanges & Stud Bolts
ASME B16.5
OTHER DIA | NPS 1/2 | |||||
CLass | 150 | 300 | 600 | 900 | 1500 | 2500 |
DIA D | 90 | 95 | 95 | 120 | 120 | 135 |
B | 11.2 | 14.3 | 20.7 | 28.7 | 28.7 | 36.6 |
DIA G | 35.1 | 35.1 | 35.1 | 35.1 | 35.1 | 35.1 |
DIA K | 60.3 | 66.7 | 66.7 | 82.6 | 82.6 | 88.9 |
NO. L | 4 | 4 | 4 | 4 | 4 | 4 |
DIA L | 15.9 | 15.9 | 15.9 | 22.2 | 22.2 | 22.2 |
Stud Bolts Diameter x Length | ||||||
DIA (in) | 1/2 | 1/2 | 1/2 | 3/4 | 3/4 | 3/4 |
lgth (mm) | 55 | 65 | 75 | 110 | 110 | 120 |
- IMPORTANT! please read this short article
Dimensional Tolerances of Blind Flanges ASME B16.5
Outside Diameter * Tolerances not listed in ASME B16.5 2013≤ 24 = 1.6 mm> 24 = ± 3.2 mm Inside Diameter not applicable Outside Diameter of Hub ≤ 12 = + 2.4 mm / – 1.6 mm≥ 14 = ± 3.2 mm Outside Diameter of Hub ≤ 12 = + 2.4 mm / – 1.6 mm≥ 14 = ± 3.2 mm Drilling Bolt Circle = 1.6 mmBolt Hole Spacing = ± 0.8 mm Eccentricity of Bolt Circle ≤ 2.1/2 = 0.8 mm max.≥ 3 = 1.6 mm max. Thickness ≤ 18 = + 3.2 mm / – 0≥ 20 = + 4.8 mm / – 0 Length thru Hub ≤ 18 = + 3.2 mm / – 0.8 mm≥ 20 = + 4.8 mm / – 1.6 mm Diameter of Contact Face 1.6 mm Raised Face = ± 0.8 mm6.35 mm Raised FaceTongue and Groove / Male-Female ± 0.4 mm Studs are measured parallel to the axis (L) from the first to the threadwithout the chamfers (points). S = free threads equals 1/3 time bolt dia Hex bolts are measured from under the head to the top of de bolt