Raised Face Flanges: Superior Sealing Solutions by Fortune Fittings Pvt. Ltd.
Raised Face Flanges are integral components in piping and plumbing systems, ensuring a robust and leak-proof connection. At Fortune Fittings Pvt. Ltd., we specialize in manufacturing high-quality raised face flanges that meet stringent industry standards, making us a trusted name in the industry.
What is a Raised Face Flanges?
A Raised Face Flange features a raised portion around the bolt holes on its face, designed to compress a gasket between two flanges effectively. This raised area provides additional support to the gasket, preventing leaks even under high pressure and temperature conditions. Raised Face Flanges are essential in applications demanding critical sealing and reliability, such as oil and gas, petrochemical, and other industrial sectors.
Types of Raised Face Flanges
At Fortune Fittings Pvt. Ltd., we offer a variety of raised face flanges, each tailored for specific applications:
- Weld Neck Flanges: Ideal for high-pressure applications, these flanges have a long tapered hub that provides additional strength.
- Slip-On Flanges: These are easy to install and are suitable for low-pressure applications.
- Blind Flanges: Used to close the end of a piping system, preventing flow.
- Threaded Flanges: Ideal for small-diameter pipes in low-pressure applications, these flanges are threaded to allow for easy connection.
Fortune Fittings Pvt. Ltd.: Quality and Precision
Fortune Fittings Pvt. Ltd. is renowned for producing raised face flanges with exceptional precision and quality. Our state-of-the-art manufacturing facility, equipped with advanced forging and machining equipment, ensures each flange meets or exceeds industry standards.
Standard Specifications
Our raised face flanges adhere to the following standards:
- Standards: ANSI B16.5, ANSI B16.47, ANSI B16.36, ANSI B16.48, BS 4504, EN1092, UNI 2277/2278, DIN, JIS, SABS1123, GOST-12820
- Forms: SORF, WNRF, BLRF, SWRF, LAP Joint, Threaded, Reducing, Spectacle
- BS/JIS: BS4504, BS1560, BS10, 5K, 10K, 16K, 20K, 30K, 40K, 63K
- Face Type: Raised Face (RF)
- Dimensions: ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings
- Size Range: From ½” (15 NB) to 48″ (1200 NB)
- Class: 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS, DIN Standard ND-6, 10, 16, 25, 40
- Connection Types: RTJ, Lap-Joint Face, Raised Face, Flat Face, Large Male-Female, Small Male-Female, Large Tongue & Groove, Small Tongue & Groove.
Ready Inventory and Custom Solutions
We maintain a ready inventory of raised face flanges in various sizes, including 2-inch, 3-inch, 4-inch, 6-inch, and 8-inch options. Additionally, we offer custom solutions tailored to meet specific requirements, ensuring our clients receive the best products and services.
Material Comparison and Applications
Our raised face flanges are available in a wide range of materials to suit different industrial needs:
- Stainless Steel: 304/304L, 316/316L, 904L
- Alloy Steel: Alloy 20, Nickel 200, Monel, Inconel, Hastelloy C22
- Carbon Steel
- Duplex Steel: 2205
- Others: Titanium, Copper Nickel, SMO 254, Aluminum, Galvanized, MS Raised Face Flange
These materials ensure durability and performance in corrosive environments, high pressures, and extreme temperatures.
Why Choose Fortune Fittings Pvt. Ltd.?
Conclusion
For superior sealing solutions, Fortune Fittings Pvt. Ltd. is your go-to manufacturer for high-quality raised face flanges. With our dedication to quality, precision, and customer satisfaction, we are poised to meet the demanding needs of various industries. Contact us today to get the best prices and discover how we can support your projects with our premium raised face flanges.
Flanges Dimensions
Dimensions Weld Neck Flanges & Stud Bolts
ASME B16.5
OTHER DIA | NPS 1/2 – O.D. 21.3 | |||||
CLass | 150 | 300 | 600 | 900 | 1500 | 2500 |
DIA A | 30 | 38 | 38 | 38 | 38 | 43 |
DIA D | 90 | 95 | 95 | 120 | 120 | 135 |
THK B | 11.2 | 14.3 | 20.7 | 28.7 | 28.7 | 36.6 |
DIA G | 35.1 | 35.1 | 35.1 | 35.1 | 35.1 | 35.1 |
DIA K | 60.3 | 66.7 | 66.7 | 82.6 | 82.6 | 88.9 |
H | 47.6 | 52.6 | 58.4 | 66.4 | 66.4 | 79.4 |
NO. L | 4 | 4 | 4 | 4 | 4 | 4 |
DIA L | 15.9 | 15.9 | 15.9 | 22.2 | 22.2 | 22.2 |
Stud Bolts Diameter x Length | ||||||
DIA (in) | 1/2 | 1/2 | 1/2 | 3/4 | 3/4 | 3/4 |
lgth (mm) | 55 | 65 | 75 | 110 | 110 | 120 |
- IMPORTANT! please read this short article
Dimensional Tolerances of Weld Neck Flanges ASME B16.5
Outside Diameter * Tolerances not listed in ASME B16.5 2013≤241.6 mm (0.06 in)>24±3.2 mm (±0.12 in) Diameter Hub at Base ≤241.6 mm (0.06 in)>24±3.2 mm (±0.12 in) Inside Diameter ≤10±0.8 mm (±0.03 in)12 thru 181.6 mm (0.06 in)≥20+3.2 mm / -1.6 mm(±0.12 in / -0.06 in) Diameter Hub at Point of Welding ≤5+2.4 mm / -0.8 mm(±0.09 in / -0.03 in)≥6+4.0 mm / -0.8 mm(+0.15 in / -0.03 in) Drilling Bolt Circle1.6 mm (0.06 in)Bolt Hole Spacing±0.8 mm (±0.03 in) Eccentricity Bolt Circle ≤2.1/20.8 mm max (0.03 in max)≥31.6 mm max (0.06 in max) Thickness ≤18+3.2 mm / -0 (+0.12 in / -0)≥20+4.8 mm / -0 (+0.18 in / -0) Length thru Hub ≤101.6 mm (0.06 in)≥12±3.2 mm (±0.12 in) Diameter Contact Face 1.6 mm RF (0.06 in)±0.8 mm (±0.03 in)6.35 mm RF (0.25 in)±0.4 mm (±0.01 in) Tongue and Groove±0.4 mm (±0.01 in)Male-Female±0.4 mm (±0.01 in) Studs are measured parallel to the axis (L) from the first to the threadwithout the chamfers (points). S = free threads equals 1/3 time bolt dia Hex bolts are measured from under the head to the top of de boltDimensions Slip On Flanges & Stud Bolts
ASME B16.5
OTHER DIA | NPS 1/2 ID 22.3 | |||||
CLass | 150 | 300 | 600 | 900 | 1500 | 2500 |
DIA A | 30 | 38 | 38 | 38 | 38 | … |
DIA D | 90 | 95 | 95 | 120 | 120 | … |
THK B | 11.2 | 14.3 | 20.7 | 28.7 | 28.7 | … |
DIA G | 35.1 | 35.1 | 35.1 | 35.1 | 35.1 | … |
DIA K | 60.3 | 66.7 | 66.7 | 82.6 | 82.6 | … |
H | 15.6 | 22.6 | 28.4 | 38.4 | 38.4 | … |
NO. L | 4 | 4 | 4 | 4 | 4 | … |
DIA L | 15.9 | 15.9 | 15.9 | 22.2 | 22.2 | … |
Stud Bolts Diameter x Length | ||||||
DIA (in) | 1/2 | 1/2 | 1/2 | 3/4 | 3/4 | … |
lgth (mm) | 55 | 65 | 75 | 110 | 110 | … |
- IMPORTANT! please read this short article
Dimensional Tolerances of Weld Neck Flanges ASME B16.5
Outside Diameter * Tolerances not listed in ASME B16.5 2013≤24 = 1.6 mm (0.06 in)>24 = ±3.2 mm (±0.12 in) Inside Diameter ≤ 10 = ± 0.8 mm≥ 12 = + 1.6 mm / – 0 mm Outside Diameter of Hub ≤ 12 = + 2.4 mm / – 1.6 mm≥ 14 = ± 3.2 mm Diameter of Counterbore Same as for Inside Diameter Drilling Bolt Circle = 1.6 mmBolt Hole Spacing = ± 0.8 mm Eccentricity of Bolt Circle ≤ 2.1/2 = 0.8 mm max.≥ 3 = 1.6 mm max. Thickness ≤ 18 = + 3.2 mm / – 0≥ 20 = + 4.8 mm / – 0 Length thru Hub ≤ 18 = + 3.2 mm / – 0.8 mm≥ 20 = + 4.8 mm / – 1.6 mm Diameter of Contact Face 1.6 mm Raised Face = ± 0.8 mm6.35 mm Raised FaceTongue and Groove / Male-Female± 0.4 mmDimensions Socket Weld Flanges & Stud Bolts
ASME B16.5
OTHER DIA | NPS 1/2 ID=22.3 F=9.5 | |||||
CLass | 150 | 300 | 600 | 900 | 1500 | 2500 |
DIA A | 30 | 38 | 38 | … | 38 | … |
DIA D | 90 | 95 | 95 | … | 120 | … |
THK B | 11.2 | 14.3 | 20.7 | … | 28.7 | … |
DIA G | 35.1 | 35.1 | 35.1 | … | 35.1 | … |
DIA K | 60.3 | 66.7 | 66.7 | … | 82.6 | … |
H | 15.6 | 22.6 | 28.4 | … | 38.4 | … |
NO. L | 4 | 4 | 4 | … | 4 | … |
DIA L | 15.9 | 15.9 | 15.9 | … | 22.2 | … |
Stud Bolts Diameter x Length | ||||||
DIA (in) | 1/2 | 1/2 | 1/2 | … | 3/4 | … |
lgth (mm) | 55 | 65 | 75 | … | 110 | … |
- ID 2 = Depending on the wall thickness of the pipe, must bespecified by the purchaser.
- IMPORTANT! please read this short article
Dimensional Tolerances of Socket Weld Flanges ASME B16.5
Outside Diameter * Tolerances not listed in ASME B16.5 2013≤ 24 = 1.6 mm> 24 = ± 3.2 mm Inside Diameter ≤ 10 = ± 0.8 mm≥ 12 = + 1.6 mm / – 0 mm Outside Diameter of Hub ≤ 12 = + 2.4 mm / – 1.6 mm≥ 14 = ± 3.2 mm Diameter of Counterbore Same as for Inside Diameter Drilling Bolt Circle = 1.6 mmBolt Hole Spacing = ± 0.8 mm Eccentricity of Bolt Circle ≤ 2.1/2 = 0.8 mm max.≥ 3 = 1.6 mm max. Thickness ≤ 18 = + 3.2 mm / – 0≥ 20 = + 4.8 mm / – 0 Length thru Hub ≤ 18 = + 3.2 mm / – 0.8 mm≥ 20 = + 4.8 mm / – 1.6 mm Diameter of Contact Face 1.6 mm Raised Face = ± 0.8 mm6.35 mm Raised FaceTongue and Groove / Male-Female± 0.4 mm Studs are measured parallel to the axis (L) from the first to the threadwithout the chamfers (points). S = free threads equals 1/3 time bolt dia Hex bolts are measured from under the head to the top of de boltDimensions Lap Joint Flanges & Stud Bolts
ASME B16.5
OTHER DIA | NPS 1/2 ID=22.9 r=3 | |||||
CLass | 150 | 300 | 600 | 900 | 1500 | 2500 |
DIA A | 30 | 38 | 38 | 38 | 38 | 43 |
DIA D | 90 | 95 | 95 | 120 | 120 | 135 |
THK B | 11.2 | 14.3 | 14.3 | 22.3 | 22.3 | 30.2 |
DIA K | 60.3 | 66.7 | 66.7 | 82.6 | 82.6 | 88.9 |
H | 16 | 22 | 22 | 32 | 32 | 40 |
NO. L | 4 | 4 | 4 | 4 | 4 | 4 |
DIA L | 15.9 | 15.9 | 15.9 | 22.2 | 22.2 | 22.2 |
Stud Bolts Diameter x Length | ||||||
DIA (in) | 1/2 | 1/2 | 1/2 | 3/4 | 3/4 | 3/4 |
lgth (mm) | 55 | 65 | 75 | 110 | 110 | 120 |
- IMPORTANT! please read this short article
Dimensional Tolerances of Lap Joint Flanges ASME B16.5
Outside Diameter * Tolerances not listed in ASME B16.5 2013≤ 24 = 1.6 mm> 24 = ± 3.2 mm Inside Diameter ≤ 10 = ± 0.8 mm≥ 12 = + 1.6 mm / – 0 mm Outside Diameter of Hub ≤ 12 = + 2.4 mm / – 1.6 mm≥ 14 = ± 3.2 mm Diameter of Counterbore Same as for Inside Diameter Drilling Bolt Circle = 1.6 mmBolt Hole Spacing = ± 0.8 mm Eccentricity of Bolt Circle ≤ 2.1/2 = 0.8 mm max.≥ 3 = 1.6 mm max. Thickness ≤ 18 = + 3.2 mm / – 0≥ 20 = + 4.8 mm / – 0 Length thru Hub ≤ 18 = + 3.2 mm / – 0.8 mm≥ 20 = + 4.8 mm / – 1.6 mm Diameter of Contact Face 1.6 mm Raised Face = ± 0.8 mm6.35 mm Raised FaceTongue and Groove / Male-Female± 0.4 mm Studs are measured parallel to the axis (L) from the first to the threadwithout the chamfers (points). S = free threads equals 1/3 time bolt dia Hex bolts are measured from under the head to the top of de boltDimensions Threaded Flanges & Stud Bolts
ASME B16.5
OTHER DIA | NPS 1/2 | |||||
CLass | 150 | 300 | 600 | 900 | 1500 | 2500 |
DIA A | 30 | 38 | 38 | 38 | 38 | 43 |
DIA D | 90 | 95 | 95 | 120 | 120 | 135 |
THK B | 11.2 | 14.3 | 20.7 | 28.7 | 28.7 | 36.6 |
DIA G | 35.1 | 35.1 | 35.1 | 35.1 | 35.1 | 35.1 |
DIA K | 60.3 | 66.7 | 66.7 | 82.6 | 82.6 | 88.9 |
H | 15.6 | 22.6 | 28.4 | 38.4 | 38.4 | 46.4 |
NO. L | 4 | 4 | 4 | 4 | 4 | 4 |
DIA L | 15.9 | 15.9 | 15.9 | 22.2 | 22.2 | 22.2 |
Stud Bolts Diameter x Length | ||||||
DIA (in) | 1/2 | 1/2 | 1/2 | 3/4 | 3/4 | 3/4 |
lgth (mm) | 55 | 65 | 75 | 110 | 110 | 120 |
- IMPORTANT! please read this short article
Dimensional Tolerances of Threaded Flanges ASME B16.5
Outside Diameter * Tolerances not listed in ASME B16.5 2013≤ 24 = 1.6 mm> 24 = ± 3.2 mm Inside Diameter Within Limits on Boring Gauge Drilling Bolt Circle = 1.6 mmBolt Hole Spacing = ± 0.8 mm Eccentricity of Bolt Circle ≤ 2.1/2 = 0.8 mm max.≥ 3 = 1.6 mm max. Outside Diameter of Hub ≤ 12 = + 2.4 mm / – 1.6 mm≥ 14 = ± 3.2 mm Diameter of Counterbore Same as forInside Diameter Thickness ≤ 18 = + 3.2 mm / – 0≥ 20 = + 4.8 mm / – 0 Length thru Hub ≤ 18 = + 3.2 mm / – 0.8 mm≥ 20 = + 4.8 mm / – 1.6 mm Diameter of Contact Face 1.6 mm Raised Face = ± 0.8 mm6.35 mm Raised FaceTongue and Groove / Male-Female± 0.4 mm Studs are measured parallel to the axis (L) from the first to the threadwithout the chamfers (points). S = free threads equals 1/3 time bolt dia Hex bolts are measured from under the head to the top of de boltDimensions Blind Flanges & Stud Bolts
ASME B16.5
OTHER DIA | NPS 1/2 | |||||
CLass | 150 | 300 | 600 | 900 | 1500 | 2500 |
DIA D | 90 | 95 | 95 | 120 | 120 | 135 |
B | 11.2 | 14.3 | 20.7 | 28.7 | 28.7 | 36.6 |
DIA G | 35.1 | 35.1 | 35.1 | 35.1 | 35.1 | 35.1 |
DIA K | 60.3 | 66.7 | 66.7 | 82.6 | 82.6 | 88.9 |
NO. L | 4 | 4 | 4 | 4 | 4 | 4 |
DIA L | 15.9 | 15.9 | 15.9 | 22.2 | 22.2 | 22.2 |
Stud Bolts Diameter x Length | ||||||
DIA (in) | 1/2 | 1/2 | 1/2 | 3/4 | 3/4 | 3/4 |
lgth (mm) | 55 | 65 | 75 | 110 | 110 | 120 |
- IMPORTANT! please read this short article
Dimensional Tolerances of Blind Flanges ASME B16.5
Outside Diameter * Tolerances not listed in ASME B16.5 2013≤ 24 = 1.6 mm> 24 = ± 3.2 mm Inside Diameter not applicable Outside Diameter of Hub ≤ 12 = + 2.4 mm / – 1.6 mm≥ 14 = ± 3.2 mm Outside Diameter of Hub ≤ 12 = + 2.4 mm / – 1.6 mm≥ 14 = ± 3.2 mm Drilling Bolt Circle = 1.6 mmBolt Hole Spacing = ± 0.8 mm Eccentricity of Bolt Circle ≤ 2.1/2 = 0.8 mm max.≥ 3 = 1.6 mm max. Thickness ≤ 18 = + 3.2 mm / – 0≥ 20 = + 4.8 mm / – 0 Length thru Hub ≤ 18 = + 3.2 mm / – 0.8 mm≥ 20 = + 4.8 mm / – 1.6 mm Diameter of Contact Face 1.6 mm Raised Face = ± 0.8 mm6.35 mm Raised FaceTongue and Groove / Male-Female ± 0.4 mm Studs are measured parallel to the axis (L) from the first to the threadwithout the chamfers (points). S = free threads equals 1/3 time bolt dia Hex bolts are measured from under the head to the top of de bolt