Series A Flanges: Precision and Reliability by Fortune Fittings Pvt. Ltd.
Series A Flanges, designated by ANSI/ASME B16.47, are integral components in various piping systems, particularly in low-pressure applications such as water and air piping systems. These flanges are known for their reliability and durability, making them a preferred choice for many industries.
What is a Series A Flange?
Series A Flanges are a standard type of flange recognized by the American National Standards Institute (ANSI). They are characterized by their smaller diameter and thinner thickness compared to Series B or Series C flanges, which are designed for higher-pressure applications. Series A Flanges are typically made from materials such as carbon steel, stainless steel, or cast iron and are available in a range of sizes to suit different piping systems.
Key Features of Series A Flanges
- Smaller Diameter and Thinner Thickness: Ideal for low-pressure applications.
- Material Variety: Available in carbon steel, stainless steel, and cast iron.
- Wide Size Range: Suitable for different piping systems with sizes ranging from ½” (15 NB) to 48″ (1200 NB).
Fortune Fittings Pvt. Ltd.: Commitment to Quality
Fortune Fittings Pvt. Ltd. specializes in manufacturing high-quality Series A flanges that meet industry standards and regulations. Our advanced technology and manufacturing techniques ensure that our flanges are durable, reliable, and have a long service life. Our experienced team is dedicated to providing excellent customer service and technical support to help our clients select the right products for their specific needs.
Standard Specifications
Our Series A Flanges comply with the following standards:
- Standards: ANSI B16.5, ANSI B16.47, ANSI B16.36, ANSI B16.48, BS 4504, EN1092, UNI 2277/2278, DIN, JIS, SABS1123, GOST-12820
- Form: SORF, WNRF, BLRF, SWRF, LAP Joint, Threaded, Reducing, Spectacle
- BS/JIS: BS4504, BS1560, BS10, 5K, 10K, 16K, 20K, 30K, 40K, 63K
- Face Type: Flat Face (FF)
- Dimensions: ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings
- Size Range: From ½” (15 NB) to 48″ (1200 NB)
- Class: 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS, DIN Standard ND-6, 10, 16, 25, 40.
- Connection Types: RTJ, Lap-Joint Face, Raised Face, Flat Face, Large Male-Female, Small Male-Female, Large Tongue & Groove, Small Tongue & Groove.
Applications of Series A Flanges
Series A Flanges are commonly used in:
- Water Piping Systems: For low-pressure water transport.
- Air Piping Systems: Ensuring safe and efficient air flow.
- General Low-Pressure Applications: Where high-pressure resistance is not a primary requirement.
Material Options
We provide Series A Flanges in a variety of materials to suit different industrial needs:
- Stainless Steel: 304/304L, 316/316L, 904L
- Alloy Steel: Alloy 20, Nickel 200, Monel, Inconel, Hastelloy C22
- Carbon Steel
- Duplex Steel: 2205
- Other Materials: Titanium, Copper Nickel, SMO 254, Aluminum, Galvanized, MS Series A Flange
Why Choose Fortune Fittings Pvt. Ltd.?
- High-Quality Manufacturing: We use advanced technology and techniques to produce durable and reliable flanges.
- Extensive Experience: Our team of professionals provides expert technical support and excellent customer service.
- Wide Range of Products: We offer a variety of sizes, materials, and pressure ratings to meet the diverse needs of our clients.
Conclusion
For reliable and high-quality Series A flanges, Fortune Fittings Pvt. Ltd. is your go-to manufacturer. With our commitment to quality and precision, we are dedicated to meeting the needs of various industries. Contact us today to get the best prices and discover how our Series A flanges can enhance your piping systems.
Flanges Dimensions
Dimensions Weld Neck Flanges & Stud Bolts
ASME B16.5
OTHER DIA | NPS 1/2 – O.D. 21.3 | |||||
CLass | 150 | 300 | 600 | 900 | 1500 | 2500 |
DIA A | 30 | 38 | 38 | 38 | 38 | 43 |
DIA D | 90 | 95 | 95 | 120 | 120 | 135 |
THK B | 11.2 | 14.3 | 20.7 | 28.7 | 28.7 | 36.6 |
DIA G | 35.1 | 35.1 | 35.1 | 35.1 | 35.1 | 35.1 |
DIA K | 60.3 | 66.7 | 66.7 | 82.6 | 82.6 | 88.9 |
H | 47.6 | 52.6 | 58.4 | 66.4 | 66.4 | 79.4 |
NO. L | 4 | 4 | 4 | 4 | 4 | 4 |
DIA L | 15.9 | 15.9 | 15.9 | 22.2 | 22.2 | 22.2 |
Stud Bolts Diameter x Length | ||||||
DIA (in) | 1/2 | 1/2 | 1/2 | 3/4 | 3/4 | 3/4 |
lgth (mm) | 55 | 65 | 75 | 110 | 110 | 120 |
- IMPORTANT! please read this short article
Dimensional Tolerances of Weld Neck Flanges ASME B16.5
Outside Diameter * Tolerances not listed in ASME B16.5 2013≤241.6 mm (0.06 in)>24±3.2 mm (±0.12 in) Diameter Hub at Base ≤241.6 mm (0.06 in)>24±3.2 mm (±0.12 in) Inside Diameter ≤10±0.8 mm (±0.03 in)12 thru 181.6 mm (0.06 in)≥20+3.2 mm / -1.6 mm(±0.12 in / -0.06 in) Diameter Hub at Point of Welding ≤5+2.4 mm / -0.8 mm(±0.09 in / -0.03 in)≥6+4.0 mm / -0.8 mm(+0.15 in / -0.03 in) Drilling Bolt Circle1.6 mm (0.06 in)Bolt Hole Spacing±0.8 mm (±0.03 in) Eccentricity Bolt Circle ≤2.1/20.8 mm max (0.03 in max)≥31.6 mm max (0.06 in max) Thickness ≤18+3.2 mm / -0 (+0.12 in / -0)≥20+4.8 mm / -0 (+0.18 in / -0) Length thru Hub ≤101.6 mm (0.06 in)≥12±3.2 mm (±0.12 in) Diameter Contact Face 1.6 mm RF (0.06 in)±0.8 mm (±0.03 in)6.35 mm RF (0.25 in)±0.4 mm (±0.01 in) Tongue and Groove±0.4 mm (±0.01 in)Male-Female±0.4 mm (±0.01 in) Studs are measured parallel to the axis (L) from the first to the threadwithout the chamfers (points). S = free threads equals 1/3 time bolt dia Hex bolts are measured from under the head to the top of de boltDimensions Slip On Flanges & Stud Bolts
ASME B16.5
OTHER DIA | NPS 1/2 ID 22.3 | |||||
CLass | 150 | 300 | 600 | 900 | 1500 | 2500 |
DIA A | 30 | 38 | 38 | 38 | 38 | … |
DIA D | 90 | 95 | 95 | 120 | 120 | … |
THK B | 11.2 | 14.3 | 20.7 | 28.7 | 28.7 | … |
DIA G | 35.1 | 35.1 | 35.1 | 35.1 | 35.1 | … |
DIA K | 60.3 | 66.7 | 66.7 | 82.6 | 82.6 | … |
H | 15.6 | 22.6 | 28.4 | 38.4 | 38.4 | … |
NO. L | 4 | 4 | 4 | 4 | 4 | … |
DIA L | 15.9 | 15.9 | 15.9 | 22.2 | 22.2 | … |
Stud Bolts Diameter x Length | ||||||
DIA (in) | 1/2 | 1/2 | 1/2 | 3/4 | 3/4 | … |
lgth (mm) | 55 | 65 | 75 | 110 | 110 | … |
- IMPORTANT! please read this short article
Dimensional Tolerances of Weld Neck Flanges ASME B16.5
Outside Diameter * Tolerances not listed in ASME B16.5 2013≤24 = 1.6 mm (0.06 in)>24 = ±3.2 mm (±0.12 in) Inside Diameter ≤ 10 = ± 0.8 mm≥ 12 = + 1.6 mm / – 0 mm Outside Diameter of Hub ≤ 12 = + 2.4 mm / – 1.6 mm≥ 14 = ± 3.2 mm Diameter of Counterbore Same as for Inside Diameter Drilling Bolt Circle = 1.6 mmBolt Hole Spacing = ± 0.8 mm Eccentricity of Bolt Circle ≤ 2.1/2 = 0.8 mm max.≥ 3 = 1.6 mm max. Thickness ≤ 18 = + 3.2 mm / – 0≥ 20 = + 4.8 mm / – 0 Length thru Hub ≤ 18 = + 3.2 mm / – 0.8 mm≥ 20 = + 4.8 mm / – 1.6 mm Diameter of Contact Face 1.6 mm Raised Face = ± 0.8 mm6.35 mm Raised FaceTongue and Groove / Male-Female± 0.4 mmDimensions Socket Weld Flanges & Stud Bolts
ASME B16.5
OTHER DIA | NPS 1/2 ID=22.3 F=9.5 | |||||
CLass | 150 | 300 | 600 | 900 | 1500 | 2500 |
DIA A | 30 | 38 | 38 | … | 38 | … |
DIA D | 90 | 95 | 95 | … | 120 | … |
THK B | 11.2 | 14.3 | 20.7 | … | 28.7 | … |
DIA G | 35.1 | 35.1 | 35.1 | … | 35.1 | … |
DIA K | 60.3 | 66.7 | 66.7 | … | 82.6 | … |
H | 15.6 | 22.6 | 28.4 | … | 38.4 | … |
NO. L | 4 | 4 | 4 | … | 4 | … |
DIA L | 15.9 | 15.9 | 15.9 | … | 22.2 | … |
Stud Bolts Diameter x Length | ||||||
DIA (in) | 1/2 | 1/2 | 1/2 | … | 3/4 | … |
lgth (mm) | 55 | 65 | 75 | … | 110 | … |
- ID 2 = Depending on the wall thickness of the pipe, must bespecified by the purchaser.
- IMPORTANT! please read this short article
Dimensional Tolerances of Socket Weld Flanges ASME B16.5
Outside Diameter * Tolerances not listed in ASME B16.5 2013≤ 24 = 1.6 mm> 24 = ± 3.2 mm Inside Diameter ≤ 10 = ± 0.8 mm≥ 12 = + 1.6 mm / – 0 mm Outside Diameter of Hub ≤ 12 = + 2.4 mm / – 1.6 mm≥ 14 = ± 3.2 mm Diameter of Counterbore Same as for Inside Diameter Drilling Bolt Circle = 1.6 mmBolt Hole Spacing = ± 0.8 mm Eccentricity of Bolt Circle ≤ 2.1/2 = 0.8 mm max.≥ 3 = 1.6 mm max. Thickness ≤ 18 = + 3.2 mm / – 0≥ 20 = + 4.8 mm / – 0 Length thru Hub ≤ 18 = + 3.2 mm / – 0.8 mm≥ 20 = + 4.8 mm / – 1.6 mm Diameter of Contact Face 1.6 mm Raised Face = ± 0.8 mm6.35 mm Raised FaceTongue and Groove / Male-Female± 0.4 mm Studs are measured parallel to the axis (L) from the first to the threadwithout the chamfers (points). S = free threads equals 1/3 time bolt dia Hex bolts are measured from under the head to the top of de boltDimensions Lap Joint Flanges & Stud Bolts
ASME B16.5
OTHER DIA | NPS 1/2 ID=22.9 r=3 | |||||
CLass | 150 | 300 | 600 | 900 | 1500 | 2500 |
DIA A | 30 | 38 | 38 | 38 | 38 | 43 |
DIA D | 90 | 95 | 95 | 120 | 120 | 135 |
THK B | 11.2 | 14.3 | 14.3 | 22.3 | 22.3 | 30.2 |
DIA K | 60.3 | 66.7 | 66.7 | 82.6 | 82.6 | 88.9 |
H | 16 | 22 | 22 | 32 | 32 | 40 |
NO. L | 4 | 4 | 4 | 4 | 4 | 4 |
DIA L | 15.9 | 15.9 | 15.9 | 22.2 | 22.2 | 22.2 |
Stud Bolts Diameter x Length | ||||||
DIA (in) | 1/2 | 1/2 | 1/2 | 3/4 | 3/4 | 3/4 |
lgth (mm) | 55 | 65 | 75 | 110 | 110 | 120 |
- IMPORTANT! please read this short article
Dimensional Tolerances of Lap Joint Flanges ASME B16.5
Outside Diameter * Tolerances not listed in ASME B16.5 2013≤ 24 = 1.6 mm> 24 = ± 3.2 mm Inside Diameter ≤ 10 = ± 0.8 mm≥ 12 = + 1.6 mm / – 0 mm Outside Diameter of Hub ≤ 12 = + 2.4 mm / – 1.6 mm≥ 14 = ± 3.2 mm Diameter of Counterbore Same as for Inside Diameter Drilling Bolt Circle = 1.6 mmBolt Hole Spacing = ± 0.8 mm Eccentricity of Bolt Circle ≤ 2.1/2 = 0.8 mm max.≥ 3 = 1.6 mm max. Thickness ≤ 18 = + 3.2 mm / – 0≥ 20 = + 4.8 mm / – 0 Length thru Hub ≤ 18 = + 3.2 mm / – 0.8 mm≥ 20 = + 4.8 mm / – 1.6 mm Diameter of Contact Face 1.6 mm Raised Face = ± 0.8 mm6.35 mm Raised FaceTongue and Groove / Male-Female± 0.4 mm Studs are measured parallel to the axis (L) from the first to the threadwithout the chamfers (points). S = free threads equals 1/3 time bolt dia Hex bolts are measured from under the head to the top of de boltDimensions Threaded Flanges & Stud Bolts
ASME B16.5
OTHER DIA | NPS 1/2 | |||||
CLass | 150 | 300 | 600 | 900 | 1500 | 2500 |
DIA A | 30 | 38 | 38 | 38 | 38 | 43 |
DIA D | 90 | 95 | 95 | 120 | 120 | 135 |
THK B | 11.2 | 14.3 | 20.7 | 28.7 | 28.7 | 36.6 |
DIA G | 35.1 | 35.1 | 35.1 | 35.1 | 35.1 | 35.1 |
DIA K | 60.3 | 66.7 | 66.7 | 82.6 | 82.6 | 88.9 |
H | 15.6 | 22.6 | 28.4 | 38.4 | 38.4 | 46.4 |
NO. L | 4 | 4 | 4 | 4 | 4 | 4 |
DIA L | 15.9 | 15.9 | 15.9 | 22.2 | 22.2 | 22.2 |
Stud Bolts Diameter x Length | ||||||
DIA (in) | 1/2 | 1/2 | 1/2 | 3/4 | 3/4 | 3/4 |
lgth (mm) | 55 | 65 | 75 | 110 | 110 | 120 |
- IMPORTANT! please read this short article
Dimensional Tolerances of Threaded Flanges ASME B16.5
Outside Diameter * Tolerances not listed in ASME B16.5 2013≤ 24 = 1.6 mm> 24 = ± 3.2 mm Inside Diameter Within Limits on Boring Gauge Drilling Bolt Circle = 1.6 mmBolt Hole Spacing = ± 0.8 mm Eccentricity of Bolt Circle ≤ 2.1/2 = 0.8 mm max.≥ 3 = 1.6 mm max. Outside Diameter of Hub ≤ 12 = + 2.4 mm / – 1.6 mm≥ 14 = ± 3.2 mm Diameter of Counterbore Same as forInside Diameter Thickness ≤ 18 = + 3.2 mm / – 0≥ 20 = + 4.8 mm / – 0 Length thru Hub ≤ 18 = + 3.2 mm / – 0.8 mm≥ 20 = + 4.8 mm / – 1.6 mm Diameter of Contact Face 1.6 mm Raised Face = ± 0.8 mm6.35 mm Raised FaceTongue and Groove / Male-Female± 0.4 mm Studs are measured parallel to the axis (L) from the first to the threadwithout the chamfers (points). S = free threads equals 1/3 time bolt dia Hex bolts are measured from under the head to the top of de boltDimensions Blind Flanges & Stud Bolts
ASME B16.5
OTHER DIA | NPS 1/2 | |||||
CLass | 150 | 300 | 600 | 900 | 1500 | 2500 |
DIA D | 90 | 95 | 95 | 120 | 120 | 135 |
B | 11.2 | 14.3 | 20.7 | 28.7 | 28.7 | 36.6 |
DIA G | 35.1 | 35.1 | 35.1 | 35.1 | 35.1 | 35.1 |
DIA K | 60.3 | 66.7 | 66.7 | 82.6 | 82.6 | 88.9 |
NO. L | 4 | 4 | 4 | 4 | 4 | 4 |
DIA L | 15.9 | 15.9 | 15.9 | 22.2 | 22.2 | 22.2 |
Stud Bolts Diameter x Length | ||||||
DIA (in) | 1/2 | 1/2 | 1/2 | 3/4 | 3/4 | 3/4 |
lgth (mm) | 55 | 65 | 75 | 110 | 110 | 120 |
- IMPORTANT! please read this short article
Dimensional Tolerances of Blind Flanges ASME B16.5
Outside Diameter * Tolerances not listed in ASME B16.5 2013≤ 24 = 1.6 mm> 24 = ± 3.2 mm Inside Diameter not applicable Outside Diameter of Hub ≤ 12 = + 2.4 mm / – 1.6 mm≥ 14 = ± 3.2 mm Outside Diameter of Hub ≤ 12 = + 2.4 mm / – 1.6 mm≥ 14 = ± 3.2 mm Drilling Bolt Circle = 1.6 mmBolt Hole Spacing = ± 0.8 mm Eccentricity of Bolt Circle ≤ 2.1/2 = 0.8 mm max.≥ 3 = 1.6 mm max. Thickness ≤ 18 = + 3.2 mm / – 0≥ 20 = + 4.8 mm / – 0 Length thru Hub ≤ 18 = + 3.2 mm / – 0.8 mm≥ 20 = + 4.8 mm / – 1.6 mm Diameter of Contact Face 1.6 mm Raised Face = ± 0.8 mm6.35 mm Raised FaceTongue and Groove / Male-Female ± 0.4 mm Studs are measured parallel to the axis (L) from the first to the threadwithout the chamfers (points). S = free threads equals 1/3 time bolt dia Hex bolts are measured from under the head to the top of de bolt