SS 316 Buttweld

Stub End

Stainless Steel · ASME B16.9 · 13 sizes

Request a quote for this item

← All SS 316 / 316L

SS 316 Buttweld

Buttweld Stub End

7307SS31640401

Material: Stainless Steel 316/316L (ASTM A403 WP316)
Type: Seamless
Schedule: SCH 40S
End Connection: Beveled End per ASME B16.25
Dimension Standard: ASME B16.9 Type A
Temperature: -196 deg C to 870 deg C
Pressure Rating: Per ASME B31.3 schedule rating
HSN Code: 73072990
GST: 18%

Schematic: letters match the table columns

Illustration

5 columns · scroll sideways

SizeNPS	OD (D)mm	Wall (t)mm	Lap OD (G)mm	Length (F)mm
1/2" NB	21.3	2.77	38	38
3/4" NB	26.7	2.87	44	38
1" NB	33.4	3.38	54	51
1-1/4" NB	42.2	3.56	64	51
1-1/2" NB	48.3	3.68	76	51
2" NB	60.3	3.91	92	64
2-1/2" NB	73.0	5.16	105	76
3" NB	88.9	5.49	127	76
4" NB	114.3	6.02	157	102
5" NB	141.3	6.55	188	102
6" NB	168.3	7.11	219	102
8" NB	219.1	8.18	270	127
10" NB	273.0	9.27	324	152

Pricing: prices for this product are not listed. Request a quotation.

Certification: MTR, PMI, dye penetrant (PT) test certificates available.
Coating: 2B mill finish. Mirror / brushed / electropolished on request.
Taxes & Duties: GST and all applicable levies charged extra at prevailing rates.

All dimensions in millimetres. Subject to change without notice. Spotted a mistake or wrong data? Please contact us.

About the stub end

A stub end (lap joint stub end) is welded to the pipe; a loose lap joint flange slides over it. The flange can rotate freely, making bolt-hole alignment trivial. Ideal for expensive alloy pipe where you want cheap carbon steel flanges rotating on a costly alloy stub end.

Welded fitting: stub end is permanently attached to the pipe
Loose backing (lap joint) flange rotates freely for easy bolt-hole alignment
Type A (long pattern) and Type B (short pattern) per ASME B16.9
Lap face (raised shoulder) contacts gasket, same sealing area as raised face flange
Allows different material for stub (alloy/SS) and backing flange (carbon steel)

Applicable Standards

Standards governing design, dimensions, and testing

ASME B16.9

Factory-Made Wrought Buttwelding Fittings

Covers the full range of industrial butt weld fittings (elbows, tees, reducers, caps, returns) in carbon steel, alloy steel, and stainless steel from ½" to 48" NB.

Applies to NPS ½" through 48" (DN 15 through DN 1200)
Schedule wall: STD / XS / XXS plus full SCH range
Radius: Long Radius (LR) 1.5D and Short Radius (SR) 1.0D elbows
Dimensional tables are the only source of 'legal' wall thickness
No pressure-temperature rating: use ASME B31.3 / B31.1 with pipe schedule
End prep: per ASME B16.25 bevel

More in SS 316 / 316L

SS 316 Buttweld

Need a quotation or technical query?

Ask for Stub End pricing, availability, MTRs and custom sizes.

Request a quote for this item